Honda D Series Forum banner
1-6 of 6 Results
  1. General Tech
    Been looking for forums to see if a d15b7 head will work on a d15z1 block haven’t found much but looking to see if anyone’s can give me some new info tia!!!
  2. General Tech
    hello guy. im new to this community so please bare with me. I have a crx that I bought and from what the previous owner told me it came with: d15z1 block y8 vtec head y8 intake manifold with a gsr throttle body and a p07 ecu so heres my problem. my rex shuts off at a stop or when in neutral...
  3. General Tech
    D15z1 engine in a 98 civic. Me and my buddy has came to the conclusion that in the civic they have kept the obd2 wiring harness and changed hook ups to the on the dizzy and put a ecu obd2 to obd1 conversion harness. We've sodered the dizzy so it plugs straight into the wiring harness (because we...
  4. Naturally Aspirated
    First of all, I'm not sure if this is the right place to post this, its been a while since I've been here, so mods feel free to move it where it should go. The problem I have with this is I'm using a VX engine harness in a 93 EX. As some of you might know VX has one extra plug at the passenger...
  5. Naturally Aspirated
    Gday, just new to this, so i apoligise for my ignorance, but any help is much appreciated. i have a EG VEI 5sp 4 door 1994 with a D15Z1. Bought the car with a blown headgasket. Replaced all gaskets, had head checked and machined, valves reground etc... got it all back together and car last 10km...
  6. New Member Introductions
    Well, I just bought my first honda, its an alright car, aside from the fact that the starter went out. Its got a D15Z1 in it, which i hear is pretty slow, lol, only pushing around 90hp, but i thought of an idea for it, since its VTEC-E at 2000 RPM up to around 5000 RPM, i thought that you could...
1-6 of 6 Results