Honda D Series Forum banner
d series
1-11 of 11 Results
  1. DOHC ZC
    Looking for street performance cams for my zc Any suggestions? Any experience? What else should i run with the cam? No boost just a fresh stock bottom end with bolts on
  2. Transmission alley
    I think I goofed pretty bad. I have never worked with honda engines before, and the previous engine in my 74 mini cooper used engine oil to oil the transmission. When I put the d16z6 in the mini, i simply put the half shafts in and filled the car with oil and let 'er rip. Ive only put about 60...
  3. New Member Introductions
    So I have a 99 dx hatch with the stock y7 and a automatic transmission. Locally there is a rebuilt y8 for sale with headbolts, valve cover, and the vtec solenoid. I'm low on cash right now, could I swap the head right on? I know I need a new ecu to wire vtec, and that a new intake mani is...
  4. Forced Induction
    Hello fellas I'm new to the forced induction world and I need a few pointers. I have recently installed a garret turbo kit to my d series and was wondering if there is anything else I need to do before dragging it to the dyno tune. Do I need to put on a adjustable cam gear? If so do I need to...
  5. Engine Building
    first off, im am BRAND new to this forum and i dont exactly know were to put this thread so if the mods or admins think it should be moved feel free !!! anyways. i just took a trip in my CRX and picked up a LOAD of parts. im talking 5 crates of stuff and interior pieces. the works. ill be...
  6. New Member Introductions
    wasup dseries.i know this question has been asked before but i added a little twist to it. how do you think a stock internal d16y8 would hold up on 12psi with a turbonetics t3/t4 t04e snail and only arp headstuds would hold up?well and supporting mods like injectors,fuel pump,hondata 3bar...
  7. Engine Management
    i got a d16z6 in my 97 ek boosted...the head has a Crower stage 2 camshaft, not sure about the valves and stuff..stock block..i was thinking about building the block with vitara pistons, eagle h beam rods, sleeve the block...get a crower stage 3 camshaft, 3 angel valve for the head..i dont know...
  8. Transmission alley
    i found a listing for a clutch for d series but im not sure if all d series have the same clutch pressure plate and throwout bearing. so do they?
  9. General Tech
    okay Im planning to do a mini swap Ive got an auto tranny (I really want a 5 speed but the auto will do for now) Im using the write up as a guide Im going to be using a p2p ECU for AT I keep hearing you have to wire in a knock sensor how do you do that? will having an auto...
  10. New Member Introductions
    Hey guys, I am planning on doing a gas saver project with a 91' crx and I am trying to figure out the best head, block ,and tranny combo for a d series to get the best mpg/hp/torque ratio possible. Any suggestions? Thanks Aaron
  11. For Sale
    My name is Kyle, I need to get this money up for school .. soo BUY!! .. three ways to reach me .. PM or respond on here, email me at [email protected] or you can text me at 4848217606. Located in Eastern PA... All prices obo.. 1996 GSR Front Brake Assembly .. Self Explanatory with these...
1-11 of 11 Results