Honda D Series Forum banner

conversion

  1. Cable to hydro help

    Transmission alley
    First post so not sure how to do this but... I have a cable d series trans, on a d15b I want to convert to hydro but I need a mount for the slave cylinder Here's pics of what I need
  2. Smallest Honda Driver? 2Ft 9inches :)!Help!

    New Member Introductions
    Hello everyone my names Joseph I'm from FL I am 28 years old. Diagnosed with Brittle bones disease I moved here to FL about a little over a year and a half and bought myself a 1991 Honda CRX as a project car. Modding the stuff broken and old stuff as I rip it out. Looking to stick with the D15B2...
  3. Auto to man conversion!

    Transmission alley
    Been wanting to convert my automatic '00 civic ex to a manual. Can anyone help me as in all parts i would need to complete this project?...is it even worth the time n money? Help
  4. A Couple Mpfi Ecus

    For Sale
    I have an auto Pg7 I don't know the year but it is out of 88-89 integra i think. $30 I have a PM8 Its a 90 and its out of a hf california CRX.. $30 here is another pic You can pm me or txt me 8.6.4.8.0.4.0.3.1.9. Prices are a little negotiatable just have to cover shipping at the most...
  5. 5-Lug Swap Using 4-Lug Suspension Parts List, FAQ

    DIY Forum
    Honda/Acura 5-Lug Swap Using 4- Lug suspension **This setup/thread will be edited as time goes on.** Disclaimer: I will not be held liable for any damage or accidents that may occur from this due to improper installation. We are all adults so whoever decides to attempt this, use it...
  6. D16Z6 with Y7 cam?? Y7 cam specs??

    Engine Building
    I wondering if anyone know the specs on a y7 stock cam?? I'm wondering if its possibe to put a y7 cam in z6 head? Thanx
  7. D16y7/z6 timing belt

    Engine Building
    I've got a d16y7/z6 with a y7 belt, I put all marks on TDC 0* on cam gear, install belt according to the manual. Once I rotate the engine one time counter clockwise the crank pulley ends up about a tooth off....any ideas??? Thanx
  8. how to convert distributor.

    DIY Forum
    I have a non vtec distributor that I want to put on a vtec head. I've heard you can convert them to work.. any know if really possible and how.
  9. D15b to d16y8 conversion

    New Member Introductions
    Hey guys so I am currently in the process of replacing my blown d15b vtec motor which is obd1 to a d16y8 vtec which is an obd2a. I want to keep it obd1 so i am using the distributor, the alternator and the intake manifold from the d15b so i can use the d15b harness. also i will be getting a...
  10. ECU Code 9

    DOHC ZC
    Hi, I'm new to this website and just looking for some answers for my OBD0 to OBD1 conversion I just did. Before I converted the car over to OBD1, the car ran perfect. But now, since I converted it over, I am getting ecu code 9, which is for the crank position sensor. I bought the distributor...
  11. Please Help needed, IM.

    Naturally Aspirated
    :wacko:Hi all, I am new to honda's and forums so this might be a challenge! So the story so far is..... Fitted d15z6 IM to D14a4 engine. Ran a few times without all hoses attached, (ran rough as expected) Maybe about half hour after this, i tried to start it again. This time all it will do is...
  12. DIY 5th Gen 2/3 Door Bumper Conversion for Sedan

    DIY Forum
    For the last year I have searched & searched & searched& searched for the "easy" way to do this without having to chop, cut, & weld... My (and members kc8enb & ChrisFrom1986) prayers have not gone unanswered! First I have to thank & give credit to CLUTCHONE & zanthrax from JDM Chat for helping...
  13. 1996 Integra LS Sedan *pics 1/21/14* jdm front & 5 lug & Auto to Manual

    Showcase
    While driving around my town recently, I spied this car with a for sale sign in it. I have seen this car sit in front of this house for a few years now. It used to look a lot better, but over time it was starting to look worse. When I saw the for sale sign, I stopped and went to check it out. It...
Top