Search Results for ‘camshaft’

Alright so I noticed while I was swapping out valves on my P08 head that the Camshaft looked much different compared to the stock camshaft I had on hand. I compared them side by side and sure enough the cam lobes are different, I'm assuming this is most likely an aftermarket cam but wasn't...

Can a D16Y8 camshaft pulley be used with a D16ZC (JDM DOHC)?

As the title says the y8 cam was toast when I got the head so please don’t say “get a y8 cam” I eventually will get a stage 2 but right now I’m stuck with a stock z6 cam. I know I need a adjustable cam gear that corresponds with the cam which is a z6 cam but I need to know what timing belt...

Hey guys, I hope everyone is having a great day. I wanted to know what everyone's opinion is on camshafts. I'm looking at getting Brian Crower Stage 2 camshaft for my d16y7. I want to get Brian Crower, Skunk2, or Blox racing. Which would be the best.

Anyone have any trouble with ebay cam gears? Bisimoto and Skunk2 adjustable cam gears like $150+ but there are some on ebay for like $30. Would it really make the $100+ difference getting a cheaper ebay cam gear than going with bisimoto or skunk2? I would probably stick with getting either a...

Hi there I have a 1991 d16a6 engine, recently replaced the head gasket and valve stem seals. I also intended to clean up rocker arm assembly but by mistake I installed exhaust rocker arm incorrectly (the position mark was on the left) Then when I start the engine I heard friction sound then...

I was at the junk yard yesterday and I found a d16z6 with non original looking cam so I grabbed it. Dizzy side code says E621. Looked up for about an hour yesterday and could not find a thing for this cam. Not sure if its aftermarket or an oem off another motor nothing

Can come one post a link to a stage 2 or 3 cam that fits a y7(civic non VTEC)? Any price and brand, I'd prefer web or Crower, much appreciated!

I just replace the head gasket on my d16y8 and installed some new ARP studs. Got it all put back together and tried to start it. Engine turns over but wont start. Im guessing its the timing belt causing the problem because i was stupid enough to forget to set the cam and crack and tdc before...

I recently blew the headgasket on my d16y8 and am about to replace it but plan on doing some other upgrades while i have the engine open. I plan on running about 8-10psi in the future, im adding the following this weekend: crower stage 1 camshaft new oem headgasket arp headstuds other than...

Ok I have a d16z6 on p29 high compression pistons got headers 93 eclipse injectors shaved head I dont know how much over just toke it to the machine shop and they said it had to be done..so im getting a blox stage 2 camshaft and I would like 2 know if is ok to put on the valve whont hit...

Hello; Alright so by this post I am not bashing or talkin crap on any company. The problem I have is that when it comes to the cylinder head parts, I don't want to get a bad part to have it mess the rest of my head up. Unfortunately, when looking for parts (Mostly cams) there is a sales pitch...

I took the timing belt off without setting it to TDC and i turned the camsaft. What will i have to do to fix the timing?

hey guys i had to sell the car so this is what i have left. Feel free to make offers. This is a complete kit with 2 pressure gauges one digital gauge(msrp $160) and a bottle heater comes with 40hp jets asking $375 for everything shipped 91 EF spindles $100 shipped d16z6 dizzy with msd...

Im going to buy stage 3 blox camshaft but it there a way to tell the difference from stage 1 to stage 3 camshaft by just looking at it?

I have been looking all over for atleast stage 2 camshafts, dual valve springs and valves but not getting any luck finding anything except for whats on ebay. Does anybody know of some stage 2+ camshaft dual valve springs and valves for decent price. I also plan on turbo charging my y8. When...