Honda D Series Forum banner

Search results

1-13 of 13 Results
Advanced Search
  1. D16Y7 turbo ignition timing

    Engine Management
    I have all that but a knock sensor, And i did that but I pulled 0.75, and then added some to the low boost/no boost areas to make it spool faster. Im just asking its not dangerous to be running such a setup?
  2. D16Y7 turbo ignition timing

    Engine Management
    So this is my setup: D16Y7 stock block turbo with all the supporting mods (injectors, etc...) ~10 psi p28 93 octane My current ignition map that im messing with: Does anyone have any pointers? it seems to be running and driving fine. Is it too much timing? I was trying to make the turbo...
  3. Turbo hotside massive exhaust leak

    Forced Induction
    I took it apart, and theres nothing but when its running i can feel a lot of air coming out. Im gonna let it run a bit more to see if anything builds up because last time there was absolutely nothing.
  4. y7 3 pin IAC not working with p28?

    Forced Induction
    yup just wired the y8 iacv and used the y8 tb, idles pretty good now
  5. y7 3 pin IAC not working with p28?

    Forced Induction
    So I put together my turbo d16y7 recently; - 00 d16y8 intake manifold with the back iacv port and the injector air hole things are plugged and not leaking - stock d16y7 throttle body with the 3 wire IACV - chipped p28 ECU So the car starts up quickly, idles at 1500RPM for a bit and then goes...
  6. Turbo hotside massive exhaust leak

    Forced Induction
    I took it apart and it all seats just find and creates a really nice seal, no pins or anything. Another thing i'm considering is maybe it's coming from under the exhaust manifold and the air is just coming out that area since its [retty tight in there.
  7. Turbo hotside massive exhaust leak

    Forced Induction
    Well the turbo is exactly how It was brand new except that I clocked it by loosening the bolts in the picture, but they were definitely tightened back. Ill try reinstalling it without any silicone and maybe resurface the flange.
  8. Turbo hotside massive exhaust leak

    Forced Induction
    https://imgur.com/gallery/uKvSAQe it seems to be coming from all around that area, but i made sure all the bolts were tight. maybe its from where the turbo connects to the manifold? I used some silicon on it (with a gasket)
  9. Turbo hotside massive exhaust leak

    Forced Induction
    So I just finished putting together my turbo d16y7 (450cc njectors, p28, walbro 255, etc...) and it starts up just fine, but theres a MASSIVE exhaust leak from what appears to be the hot side of the turbo, maybe from the cast manifold, or both. does anyone have a solution for this? all the bolts...
  10. is p2p0.com legit?

    Engine Building
    Oh ok thanks, I guess they just didnt update their website becuase it looks like it's straight out off the early 2010's
  11. is p2p0.com legit?

    Engine Building
    Im looking on building my motor this winter and this website has some nice prices and shipping on everything, has anyone used this website before?
  12. D16Y5 Clutch kit on D16Y7

    Engine Building
    So I'm considering buying this Ebay clutch kit for my Ek hatch (Im not here to discuss if ebay is good or not, just want to see if it will work) So it says it fits 92-05 civcs which is kinda weird since thats 3 different generations. It says it ins't compatible with my CX hatch but the closest...
  13. 410cc RDX injectors

    Forced Induction
    Hi, im planning to turbo my D16Y7, and ive been looking for injectors and i found these "410cc RDX injectors" on ebay, and I was wondering how I can install them on my motor. I found some top hats for those injectors that are meant to make them fit, so is that all im gonna need? maybe different...
1-13 of 13 Results
Top