D15b2 Block options - D-series.org

Go Back   D-series.org Everything Else New Member Introductions

D-Series.org is the premier Honda All Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools Display Modes
Old 08-26-2017, 06:46 PM   #1 (permalink)
gonzo
 
iTrader: (0)
Join Date: Aug 2017
Posts: 0
Rep Power: 0 ThreeSistersPainting is worse than Satan's assholeThreeSistersPainting is worse than Satan's asshole
iTrader Score: 0 reviews
Default D15b2 Block options

Hey all!

I have a d15b2/d16z6 mini with a fresh rebuild. Recently the flywheel came loose and sent a shock all the way through to the harmonic balancer. I immediately drove it home and pulled the engine.

The only damage I see is to the block by the oil pump (see pictures). I rotated the crankshaft with it assembled in the block and it seems to spin true, the girdle bolts were a little tighter (assuming the vibration through the crankshaft snugged those up).

So since I had to tear the motor out again I am turning it NA all motor and beefing up the bottom end. The search for a new block begins, I had h-beams and arp rod bolts already for the d15b2 motor (134.5 mm, not d15b7 137 mm) so I am searching for a block that will work. Will a d15b2 crankshaft sit in a d15b7 block and girdle or does it have different size journals?

Also looking for a high compression floating piston to run with my rods, any ideas?
Attached Thumbnails
Click image for larger version

Name:	IMG_1464.JPG
Views:	26
Size:	739.5 KB
ID:	122330   Click image for larger version

Name:	IMG_1465.JPG
Views:	26
Size:	640.7 KB
ID:	122338  
ThreeSistersPainting is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 08-26-2017, 09:09 PM   #2 (permalink)
BATSLOMAN GIVES 0 FUCKS
 
slo_eg8's Avatar
 
iTrader: (28)
Join Date: Mar 2009
Location: TAMPA FLORIDA
Posts: 3,853
Rep Power: 50 slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !
slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !
iTrader Score: 28 reviews
Send a message via AIM to slo_eg8
Default

how much searching have you done?
__________________
turbo d16z6
.42/.48 garrett
je pistons, eagle rods, y7 lsd trans w/4.3fd
koni yellow/gc coils
uber rare eg6 optional snowflakes

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

new 95 ej1.
slo_eg8 is offline   Reply With Quote Quick reply to this message
Old 08-26-2017, 11:39 PM   #3 (permalink)
Brokedick Millionaire
 
transzex's Avatar
 
iTrader: (59)
Join Date: Dec 2003
Location: Cincity OH
Posts: 40,180
Rep Power: 108 transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !
transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !
iTrader Score: 59 reviews
Default

Oh My God.

Since a D15B2 and D15B7 are the same shortblock.....this might be the exit point where I give up.
__________________
Mista Bone



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


Quote:
Originally Posted by patprimmer RIP
I will always feed an inquisitive mind, prod a lazy noob and blast a disrespectful bum.
transzex is offline   Reply With Quote Quick reply to this message
 
Old 08-27-2017, 05:43 AM   #4 (permalink)
gonzo
 
iTrader: (0)
Join Date: Aug 2017
Posts: 0
Rep Power: 0 ThreeSistersPainting is worse than Satan's assholeThreeSistersPainting is worse than Satan's asshole
iTrader Score: 0 reviews
Default

Blocks are the same but the crank/rod set up is different due to the different stroke.

My question is Will a d15b2 crank sit into a d15b7 block/girdle or do they have different size journals?

Responding with a "did you search" post is a waste of your time and space on my post, I wouldn't be here asking the question if I found the answer.
ThreeSistersPainting is offline   Reply With Quote Quick reply to this message
Old 08-27-2017, 05:45 AM   #5 (permalink)
gonzo
 
iTrader: (0)
Join Date: Aug 2017
Posts: 0
Rep Power: 0 ThreeSistersPainting is worse than Satan's assholeThreeSistersPainting is worse than Satan's asshole
iTrader Score: 0 reviews
Default

It's a simple yes or no question, or do the members on here feel better than those that are labeled as a n00b.
ThreeSistersPainting is offline   Reply With Quote Quick reply to this message
Old 08-27-2017, 12:26 PM   #6 (permalink)
Brokedick Millionaire
 
transzex's Avatar
 
iTrader: (59)
Join Date: Dec 2003
Location: Cincity OH
Posts: 40,180
Rep Power: 108 transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !
transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !
iTrader Score: 59 reviews
Default

Quote:
Originally Posted by ThreeSistersPainting View Post
Blocks are the same but the crank/rod set up is different due to the different stroke.

My question is Will a d15b2 crank sit into a d15b7 block/girdle or do they have different size journals?

Responding with a "did you search" post is a waste of your time and space on my post, I wouldn't be here asking the question if I found the answer.
As I correctly stated before, B1, B2, B7 are all the exact same PM3 short block except for the block stamping. Some years of the B8 used the 16V pistons instead of the HF 8 valve pistons.

134mm rods, not 134.5mm, not 137mm.
__________________
Mista Bone



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


Quote:
Originally Posted by patprimmer RIP
I will always feed an inquisitive mind, prod a lazy noob and blast a disrespectful bum.
transzex is offline   Reply With Quote Quick reply to this message
Old 08-27-2017, 12:29 PM   #7 (permalink)
Brokedick Millionaire
 
transzex's Avatar
 
iTrader: (59)
Join Date: Dec 2003
Location: Cincity OH
Posts: 40,180
Rep Power: 108 transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !
transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !transzex is on a level you can only DREAM about! ! !
iTrader Score: 59 reviews
Default

Quote:
Originally Posted by ThreeSistersPainting View Post
It's a simple yes or no question, or do the members on here feel better than those that are labeled as a n00b.
Well I gave you the correct answer, but you rejected it. How can you reject it as being wrong if you have no idea, thus why you asked the question in first place?
__________________
Mista Bone



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


Quote:
Originally Posted by patprimmer RIP
I will always feed an inquisitive mind, prod a lazy noob and blast a disrespectful bum.
transzex is offline   Reply With Quote Quick reply to this message
Old 08-27-2017, 03:26 PM   #8 (permalink)
BATSLOMAN GIVES 0 FUCKS
 
slo_eg8's Avatar
 
iTrader: (28)
Join Date: Mar 2009
Location: TAMPA FLORIDA
Posts: 3,853
Rep Power: 50 slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !
slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !
iTrader Score: 28 reviews
Send a message via AIM to slo_eg8
Default

Quote:
Originally Posted by ThreeSistersPainting View Post
It's a simple yes or no question, or do the members on here feel better than those that are labeled as a n00b.
its a simple search noob. get off your high horse and do your own leg work.....even though bone spoon fed you.....now I cant use my photo.......





nah, fuck it

__________________
turbo d16z6
.42/.48 garrett
je pistons, eagle rods, y7 lsd trans w/4.3fd
koni yellow/gc coils
uber rare eg6 optional snowflakes

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

new 95 ej1.
slo_eg8 is offline   Reply With Quote Quick reply to this message
Old 08-27-2017, 04:34 PM   #9 (permalink)
gonzo
 
iTrader: (0)
Join Date: Aug 2017
Posts: 0
Rep Power: 0 ThreeSistersPainting is worse than Satan's assholeThreeSistersPainting is worse than Satan's asshole
iTrader Score: 0 reviews
Default

slo-eggo what is your deal? Are you not here to help guide us little noobs to victory? instead you go on a little kid rampage and deduct some rep points I didnt have, then try to burn me with an over used meme picture.

I was trying to get confirmation on my question to back up what I have already read. That is why I asked for a yes or no question.
ThreeSistersPainting is offline   Reply With Quote Quick reply to this message
Old 08-27-2017, 05:26 PM   #10 (permalink)
BATSLOMAN GIVES 0 FUCKS
 
slo_eg8's Avatar
 
iTrader: (28)
Join Date: Mar 2009
Location: TAMPA FLORIDA
Posts: 3,853
Rep Power: 50 slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !
slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !slo_eg8 is on a level you can only DREAM about! ! !
iTrader Score: 28 reviews
Send a message via AIM to slo_eg8
Default

if the blocks are the same, why would the cranks change? a google search could have told you what bone already mentioned. but yes, IM the asshole. welcome to d-so. grow some thicker skin and learn to search.....or try not to slam the door on your way out.
__________________
turbo d16z6
.42/.48 garrett
je pistons, eagle rods, y7 lsd trans w/4.3fd
koni yellow/gc coils
uber rare eg6 optional snowflakes

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

new 95 ej1.
slo_eg8 is offline   Reply With Quote Quick reply to this message
Old 08-29-2017, 06:11 AM   #11 (permalink)
DIY Guru
 
BogusSVO's Avatar
 
iTrader: (4)
Join Date: Dec 2014
Location: North Gulf coast Al/Fl
Posts: 637
Rep Power: 13 BogusSVO is the fucking MAN!!!!BogusSVO is the fucking MAN!!!!BogusSVO is the fucking MAN!!!!
BogusSVO is the fucking MAN!!!!BogusSVO is the fucking MAN!!!!BogusSVO is the fucking MAN!!!!BogusSVO is the fucking MAN!!!!BogusSVO is the fucking MAN!!!!BogusSVO is the fucking MAN!!!!BogusSVO is the fucking MAN!!!!BogusSVO is the fucking MAN!!!!BogusSVO is the fucking MAN!!!!BogusSVO is the fucking MAN!!!!BogusSVO is the fucking MAN!!!!BogusSVO is the fucking MAN!!!!
iTrader Score: 4 reviews
Send a message via Yahoo to BogusSVO
Default

wow....

took all of 2 mins to confirm...
both the B2 and the B7 have the same bore.. so that makes the stroke the same..
also the run the same part number main bearings..

and my google fu is not near what the Slo or the Trans is..

So if I can find it that quick.. so can you
__________________
Quote:
this is probably the best noob weve ever had just pop in and actually be worth his weight
Quote:
BogusSVO nomination for newb of the year 2014, maybe lifetime honorary mention as well.
BogusSVO is offline   Reply With Quote Quick reply to this message
Old 08-29-2017, 07:24 AM   #12 (permalink)
wise in the ways of the D
 
AutoXCivic's Avatar
 
iTrader: (19)
Join Date: Sep 2007
Location: Eugene, Oregon
Posts: 1,754
Rep Power: 25 AutoXCivic Still a JDM Star....
AutoXCivic Still a JDM Star....AutoXCivic Still a JDM Star....AutoXCivic Still a JDM Star....AutoXCivic Still a JDM Star....AutoXCivic Still a JDM Star....AutoXCivic Still a JDM Star....AutoXCivic Still a JDM Star....AutoXCivic Still a JDM Star....AutoXCivic Still a JDM Star....AutoXCivic Still a JDM Star....
iTrader Score: 19 reviews
Send a message via AIM to AutoXCivic Send a message via MSN to AutoXCivic Send a message via Yahoo to AutoXCivic
Default

Quote:
Originally Posted by BogusSVO View Post
wow....

took all of 2 mins to confirm...
both the B2 and the B7 have the same bore.. so that makes the stroke the same..
also the run the same part number main bearings..

and my google fu is not near what the Slo or the Trans is..

So if I can find it that quick.. so can you
Also ... from memory. JDM blocks are not stamped with the last number, how do they figure out what to use? If they don't feel the need to differentiate between the blocks ... my guess would be that ... there isn't one.
__________________
Straight lines are for sissies.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
<--- Stolen
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
<--- Sold.

Quote:
barrel roll in airplane > barrel roll in nsx
AutoXCivic is offline   Reply With Quote Quick reply to this message
Old 10-15-2017, 12:51 PM   #13 (permalink)
n00b
 
iTrader: (0)
Join Date: Oct 2017
Posts: 0
Rep Power: 0 Slow-D is nobody
iTrader Score: 0 reviews
Default

Quote:
Originally Posted by transzex View Post
As I correctly stated before, B1, B2, B7 are all the exact same PM3 short block except for the block stamping. Some years of the B8 used the 16V pistons instead of the HF 8 valve pistons.

134mm rods, not 134.5mm, not 137mm.
Thank you for this info now I know what I can get for a future rebuild if needed.
Slow-D is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the D-series.org forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Security Question
*Required, this field is not shown to others: While balancing on a piece of wood, two inches by four inches known as a 2x4, john and his friend sally both spotted a dalmatian inside a truck with sirens, headed to put out a fire. State what kind of animal is mentioned in the sentence above.
Insurance
Please select your insurance company (Optional)

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


iconAll times are GMT -8. The time now is 12:58 PM. | Welcome to Forum, please register to access all of our features.