d16y8 Things to know - D-series.org

Go Back   D-series.org D-series Knowledge Factory General Tech

D-Series.org is the premier Honda All Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools Display Modes
Old 03-21-2017, 12:29 AM   #1 (permalink)
n00b
 
iTrader: (0)
Join Date: Mar 2017
Posts: 1
Rep Power: 0 mj_bowman is nobody
iTrader Score: 0 reviews
Default d16y8 Things to know

Engine Specs:
-Firing Order(1-3-4-2)
-Compression Ratio(9.6:1)
-Horsepower([email protected])
-Torque([email protected])
-Bore(2.9530"-2.9540"(75mm))
-Stroke(3.54"(90mm))
-Deck Height(8.347")
-Rod Length(5.394")
-Oil Pressure at 3000RPM(50psi)
-Oil Pressure at Idle(10psi)
-Standard Cylinder Compression(184psi)
-Valve Clearances:
-Intake
-((0.007"-0.009")(0.18mm-0.23mm))
-Exhaust
-((0.009"-0.011")(0.23mm-0.27mm))
-Piston Cleareances:
-Piston Diameter(2.9520"-2.9524")
-Piston-to-cylinder wall clearance
-Standard(0.0004"-0.0016")
-Service Limit(0.002")
-Ring Groove Clearance
-Top Compression Ring
-Standard(0.0014"-0.0024")
-Service Limit(0.005")
-2nd Compression Ring
-Standard(0.0012"-0.0022")
-Service Limit(0.005")
-Ring end gap
-Top compression ring
-Standard(0.006"-0.012")
-Service Limit(0.024")
-2nd compression ring
-Standard(0.012"-0.018")
-Service Limit(0.028")
-Oil Control Ring
-Standard(0.008"-0.028")
-Service limit(0.031")
-Throttle Body Size:
-56.00mm
-Head Chamber Volume:
-32.8ccl
-Cylinder Head Specs:
-Intake(30mm)
-Exhaust(26mm)

Torque Specs:
-8mm Camshaft Bolts(14ft-lbs)
-6mm Camshaft Bolts(9ft-lbs)
-Camshaft Pulley Bolt(27ft-lbs)
-Crankshaft Pulley Bolt(14ft-lbs+90*)
-Connecting Rod Nut(23ft-lbs)
-Cylinder Head Bolts:
Note: Torque Inside out Diagonally
1. Bolts 1-10(15ft-lbs)
2. Bolts 1-10(36ft-lbs)
3. Bolts 1-10(49ft-lbs)
4. Bolts 1 & 2(49ft-lbs)
-Distributer Mount Bolt(17ft-lbs)
-Flywheel Bolt(87ft-lbs)
-Intake Manifold Nuts(17ft-lbs)
-Exhaust Manifold Nuts(23ft-lbs)
-Water Pump Bolts(9ft-lbs)
-Timing Belt Cover(8ft-lbs)
-Timing Belt Tensioner(33ft-lbs)
-Valve Cover Bolts(8ft-lbs)
-Oil Pan Bolts(9ft-lbs)
-Oil Pressure Switch(13ft-lbs)
-Oil Pan Drain Plug(29ft-lbs)
-Main Bearing Cap Bolt
1. (18ft-lbs)
2. (36ft-lbs)
-End Rocker Arm Shaft Cap(16ft-lbs)
-Timing Belt Adjuster Bolt(33ft-lbs)
-Valve Adjustment Nut(14ft-lbs)
-Vtec Solenoid Bolts(8.7ft-lbs)
-M/T Tranny Drain and Fill Plug(35ft-lbs)
-Wheel Lug Nuts(80ft-lbs)
-Fuel Filter Banjo Bolt(16ft-lbs)
-Spark Plug(13ft-lbs)
-Waterpump Pulley Bolts(9ft-lbs)
-Thersmostat Housing Bolts(9ft-lbs)
-Waterpump Attaching Bolts(9ft-lbs)
-Throttle Body Nuts(16ft-lbs)
-Fuel Rail Nut(9ft-lbs)
-Tranny Case to Flywheel Housing(20ft-lbs)
-Tranny to Engine bolts(50ft-lbs)
-Cam cover crown nuts(7ft-lbs)
-Crank(vibration) damper bolt(119ft-lbs)
-Oil Pickup Tube Bolts(17ft-lbs)
-Oil Pump to Engine Block Bolts/Nuts(9ft-lbs)
-Oil Pump Screen Bolts(8ft-lbs)
-Oil Pump Cover Screws(5ft-lbs)

-Maintenance Tips:
-Valve Cover Gasket
-Apply Hondabond on corners and around cam lumps
-Cam/Rocker Tightening Order:
-Intake 13 7 5 1 3 9 11
-Exhaust 12 10 4 2 6 8 14
-Valve Adjustment
-Adjustment Order:
-Exhaust No. 1??Intake No. 1
-Exhaust No. 3??Intake No. 3
-Exhaust No. 4??Intake No. 4
-Exhaust No. 2??Intake No. 2
-Torque Each Adjustment Nut to 14ft-lbs
-After each Cylinder is Complete Rotate Camshaft 90* Counter-Clockwise(Use "UP" Mark on Cam Pulley)
-Intake Valve Clearance
-((0.007"-0.009")(0.18mm-0.23mm))
-Exhaust Valve Clearance
-((0.009"-0.011")(0.23mm-0.27mm))
__________________________________
mj_bowman is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 03-21-2017, 05:29 PM   #2 (permalink)
D-Series cadet
 
Sailor's Avatar
 
iTrader: (0)
Join Date: Nov 2014
Location: Hampshire, England
Posts: 318
Rep Power: 14 Sailor is the fucking MAN!!!!Sailor is the fucking MAN!!!!Sailor is the fucking MAN!!!!
Sailor is the fucking MAN!!!!Sailor is the fucking MAN!!!!Sailor is the fucking MAN!!!!Sailor is the fucking MAN!!!!Sailor is the fucking MAN!!!!Sailor is the fucking MAN!!!!Sailor is the fucking MAN!!!!Sailor is the fucking MAN!!!!Sailor is the fucking MAN!!!!Sailor is the fucking MAN!!!!Sailor is the fucking MAN!!!!Sailor is the fucking MAN!!!!Sailor is the fucking MAN!!!!
iTrader Score: 0 reviews
Default

Interesting and thorough.

Now let us have exactly that list for the other variants, please!
__________________
Four Hondas: two working


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Sailor is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the D-series.org forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Security Question
*Required, this field is not shown to others: While balancing on a piece of wood, two inches by four inches known as a 2x4, john and his friend sally both spotted a dalmatian inside a truck with sirens, headed to put out a fire. State what kind of animal is mentioned in the sentence above.
Insurance
Please select your insurance company (Optional)

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


iconAll times are GMT -8. The time now is 05:02 PM. | Welcome to Forum, please register to access all of our features.