My build. (finally getting some momentum) - D-series.org

Go Back   D-series.org Motor Mayhem & Suspension Satisfaction Forced Induction

D-Series.org is the premier Honda All Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools Display Modes
Old 04-07-2008, 08:39 PM   #1 (permalink)
D-series lover
 
iTrader: (4)
Join Date: Dec 2007
Posts: 201
Rep Power: 12 JoeyOKC is trying to make new friends
iTrader Score: 4 reviews
Default My build. (finally getting some momentum)

As of mid December, I was planning on a 13:1 motor build with nitrous, but one night I had a dream that I had a turbo car, and the next day I started ordering parts. haha! Unfortuantely, i have some all motor parts in the closet that I won't be using, but maybe after I get the turbo project done, I'll build a high compression engine as a back up.

Anywway, block was taken to the machine shop today. D16Y8...CP 9:1, Total Seal rings and FJ Distributors rods. Block is getting bored using a torque plate and honed for the 75.5 pistons. Rods are being balanced. Crank is being polished. Block and Head are being resurfaced...dunno the exact spec on that yet.
I have almost everything to complete the setup except for a couple things that are on the way, or pending.

Setup:

D16Y8 block
CP 9:1
FJ Distributors Rods
ARP rod bolts
ARP Head studs
New Factory girdle/main bolts
Endyn style modded new factory oil pump


D16Y8 Head
Mild port to clean up castings
Crower Stage 2 Camshaft
Crower Valve Springs and Retainers


Full-Race.com Ramhorn
Precision SC5031 turbo
3" downpipe
TiAL 44mm WG
TiAL BOV
Precision Intercooler

CRX Si Tranny (for now)
Clutchmasters Stage 3
Stock Flywheel

Gator Axles

Walbro 255lph
XS Fuel Pressure Regulator

880 or 1000cc injectors
AEM fuel Rail


OBD0 to OBD1 conversion harness
OBD1 Distributor
Hondata s300 (will order after I recover from having the block work done)
AEM 3.5 bar MAP sensor
p28

Shooting for 400whp on 91 + methanol. May change though. Hoping to hit 12.0s or better.

Car is 1991 Civic Si hatchback. Originally the green color(not sure maybe Tahitian Green Pearl), but some jackass flatblacked over it. Hopefully getting repainted factory color sometime next winter.
Attached Thumbnails
Click image for larger version

Name:	turd1.jpg
Views:	158
Size:	159.1 KB
ID:	17592   Click image for larger version

Name:	turd.jpg
Views:	162
Size:	188.4 KB
ID:	17593  
__________________
LOL @ the same people who come out of the wood work to lecture about street racing.

Last edited by JoeyOKC; 09-13-2008 at 11:39 PM.
JoeyOKC is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 04-07-2008, 09:13 PM   #2 (permalink)
Boost Gets You Laid
 
torturedsol's Avatar
 
iTrader: (36)
Join Date: Apr 2006
Location: Hillsboro, WV 24946
Posts: 4,402
Rep Power: 35 torturedsol is on a level you can only DREAM about! ! !torturedsol is on a level you can only DREAM about! ! !torturedsol is on a level you can only DREAM about! ! !torturedsol is on a level you can only DREAM about! ! !
torturedsol is on a level you can only DREAM about! ! !torturedsol is on a level you can only DREAM about! ! !torturedsol is on a level you can only DREAM about! ! !torturedsol is on a level you can only DREAM about! ! !torturedsol is on a level you can only DREAM about! ! !torturedsol is on a level you can only DREAM about! ! !torturedsol is on a level you can only DREAM about! ! !torturedsol is on a level you can only DREAM about! ! !torturedsol is on a level you can only DREAM about! ! !torturedsol is on a level you can only DREAM about! ! !torturedsol is on a level you can only DREAM about! ! !torturedsol is on a level you can only DREAM about! ! !
iTrader Score: 36 reviews
Send a message via AIM to torturedsol
Default

Sounds good, need more pix
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
torturedsol is offline   Reply With Quote Quick reply to this message
Old 07-07-2008, 04:20 PM   #3 (permalink)
D-series lover
 
iTrader: (4)
Join Date: Dec 2007
Posts: 201
Rep Power: 12 JoeyOKC is trying to make new friends
iTrader Score: 4 reviews
Default

well, i know thiis isn't too interesting without pics, but i'm getting closer to the prize. everything that's highlighted green is what I have and the red is what I don't, so if anyone has any of those parts for sale, let me know!

I'm starting to think that the precision 650s are going to be a weak link, and i may need something more like 880cc injectors for the 101 map.

Once I get this thing up and running, the goal is to take it to Tony at T1 to be tuned. hoping for end of summer, but at this point, it's getting more and more pushed back. The machine shop took 3 months to get my bottom end done, so in turn, everything else is pushed back.


i'll try to get some pics tomorrow.
__________________
LOL @ the same people who come out of the wood work to lecture about street racing.
JoeyOKC is offline   Reply With Quote Quick reply to this message
 
Old 07-07-2008, 04:28 PM   #4 (permalink)
D-series G0D
 
iTrader: (164)
Join Date: Jul 2006
Location: GO-AUTOWORKS.COM
Posts: 6,837
Rep Power: 23 GO-AUTOWORKS is the fucking MAN!!!!GO-AUTOWORKS is the fucking MAN!!!!GO-AUTOWORKS is the fucking MAN!!!!
GO-AUTOWORKS is the fucking MAN!!!!GO-AUTOWORKS is the fucking MAN!!!!GO-AUTOWORKS is the fucking MAN!!!!GO-AUTOWORKS is the fucking MAN!!!!
iTrader Score: 164 reviews
Default

Looks like your off to a great start
GO-AUTOWORKS is offline   Reply With Quote Quick reply to this message
Old 07-07-2008, 06:17 PM   #5 (permalink)
D-series G0D
 
BLK92_D16's Avatar
 
iTrader: (78)
Join Date: Feb 2006
Location: Greenville, SC
Posts: 13,322
Rep Power: 30 BLK92_D16 Still a JDM Star....
BLK92_D16 Still a JDM Star....BLK92_D16 Still a JDM Star....BLK92_D16 Still a JDM Star....BLK92_D16 Still a JDM Star....BLK92_D16 Still a JDM Star....BLK92_D16 Still a JDM Star....BLK92_D16 Still a JDM Star....BLK92_D16 Still a JDM Star....
iTrader Score: 78 reviews
Default

Use the E85! If you've got access to it you'll thank yourself later! I'll be aiming for a 350whp build running E85 myself.
BLK92_D16 is offline   Reply With Quote Quick reply to this message
Old 07-08-2008, 09:19 AM   #6 (permalink)
D-series soldier
 
1992Si's Avatar
 
iTrader: (1)
Join Date: Apr 2007
Location: Somers CT
Posts: 867
Rep Power: 13 1992Si is starting to learn the ropes1992Si is starting to learn the ropes1992Si is starting to learn the ropes1992Si is starting to learn the ropes1992Si is starting to learn the ropes1992Si is starting to learn the ropes1992Si is starting to learn the ropes
iTrader Score: 1 reviews
Default

Make sure you do the oil pump mod for the y8. there's a sticky here somewhere.

Check the engine building forum up top.
__________________
Best ET 9.85 @ 145.68MPH, 586WHP D16z6, best 60ft 1.54


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
1992Si is offline   Reply With Quote Quick reply to this message
Old 07-08-2008, 09:33 AM   #7 (permalink)
\/ apply baby lotion here \/
 
Pata's Avatar
 
iTrader: (136)
Join Date: Jun 2008
Location: City of Angels
Posts: 11,260
Rep Power: 46 Pata is on a level you can only DREAM about! ! !Pata is on a level you can only DREAM about! ! !Pata is on a level you can only DREAM about! ! !Pata is on a level you can only DREAM about! ! !Pata is on a level you can only DREAM about! ! !
Pata is on a level you can only DREAM about! ! !Pata is on a level you can only DREAM about! ! !Pata is on a level you can only DREAM about! ! !Pata is on a level you can only DREAM about! ! !Pata is on a level you can only DREAM about! ! !Pata is on a level you can only DREAM about! ! !
iTrader Score: 136 reviews
Default

Nice to do list.

Pix look cool but we need more!
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Pata is offline   Reply With Quote Quick reply to this message
Old 07-08-2008, 09:50 AM   #8 (permalink)
D-series G0D
 
99EJ6T's Avatar
 
iTrader: (32)
Join Date: Aug 2005
Location: The one and only "BAY AREA", CA
Posts: 14,661
Rep Power: 45 99EJ6T is on a level you can only DREAM about! ! !99EJ6T is on a level you can only DREAM about! ! !99EJ6T is on a level you can only DREAM about! ! !
99EJ6T is on a level you can only DREAM about! ! !99EJ6T is on a level you can only DREAM about! ! !99EJ6T is on a level you can only DREAM about! ! !99EJ6T is on a level you can only DREAM about! ! !
iTrader Score: 32 reviews
Default

might want to add an LSD to your list. and possibly remove the gator axles, since stock have proven to work well when you have an LSD.



__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
99EJ6T is offline   Reply With Quote Quick reply to this message
Old 07-08-2008, 01:06 PM   #9 (permalink)
D-series soldier
 
YakuzaKirby's Avatar
 
iTrader: (1)
Join Date: Dec 2004
Location: cleveland ohio, land of snow, salt, turbo deisel dualies, and lip-spoiler destroying potholes
Posts: 780
Rep Power: 16 YakuzaKirby is fly like an eagleYakuzaKirby is fly like an eagleYakuzaKirby is fly like an eagleYakuzaKirby is fly like an eagleYakuzaKirby is fly like an eagleYakuzaKirby is fly like an eagleYakuzaKirby is fly like an eagleYakuzaKirby is fly like an eagleYakuzaKirby is fly like an eagleYakuzaKirby is fly like an eagleYakuzaKirby is fly like an eagle
iTrader Score: 1 reviews
Send a message via AIM to YakuzaKirby Send a message via MSN to YakuzaKirby Send a message via Yahoo to YakuzaKirby
Default

i think... we need more pics.
__________________
'93 EJ1 TURBO AUTO... @12psi... not anymore...

current car=
'87 Supra 5-speed Turbo Targa-
LIPP Boss series T04E-61mm, LIPP AFM housing, Lexus AFM, BIC DDP, 3.5" downpipe-back, K&N intake, HKS SSQV, GReddy Profec B boost controller, Apex'i AFC NEO, HKS 1.2mm mhg, wideband with AEM AFR gauge. Walboro 255lph pump, RC820cc injectors stock suspension. Block Bored .020 and decked by Webber Racing, Head milled .010 and 5-angle valve job by Webber Racing
ARP rod bolts, ARP headstuds... Clevite 77 bearings
483rwhp @22psi
putting it back together...

oh yeah. and i have a turbo del sol. almost forgot. lolz.

BTW. COD4. XBOX Live gamertag = AM6 Zero

I will newb-tube the fuck out of you. lol
YakuzaKirby is offline   Reply With Quote Quick reply to this message
Old 07-08-2008, 02:34 PM   #10 (permalink)
D-series lover
 
iTrader: (4)
Join Date: Dec 2007
Posts: 201
Rep Power: 12 JoeyOKC is trying to make new friends
iTrader Score: 4 reviews
Default





__________________
LOL @ the same people who come out of the wood work to lecture about street racing.

Last edited by JoeyOKC; 07-08-2008 at 02:36 PM.
JoeyOKC is offline   Reply With Quote Quick reply to this message
Old 07-08-2008, 02:52 PM   #11 (permalink)
D-series G0D
 
boostfreak0885's Avatar
 
iTrader: (13)
Join Date: Jan 2008
Location: delaware
Posts: 6,966
Rep Power: 20 boostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcano
boostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcano
iTrader Score: 13 reviews
Send a message via AIM to boostfreak0885
Default

looks good man.... did you check the clearances..??? cuz if you got it honed by a shop, dont trust them
__________________
my new and improved build... check it out

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


best time so far
11.201 at 128mph with a 1.79 60 foot.. damn i need traction, best trap speed is 129mph. 26psi h1c

NEW best 60' 1.56!!!
boostfreak0885 is offline   Reply With Quote Quick reply to this message
Old 07-08-2008, 03:04 PM   #12 (permalink)
D-series G0D
 
BLK92_D16's Avatar
 
iTrader: (78)
Join Date: Feb 2006
Location: Greenville, SC
Posts: 13,322
Rep Power: 30 BLK92_D16 Still a JDM Star....
BLK92_D16 Still a JDM Star....BLK92_D16 Still a JDM Star....BLK92_D16 Still a JDM Star....BLK92_D16 Still a JDM Star....BLK92_D16 Still a JDM Star....BLK92_D16 Still a JDM Star....BLK92_D16 Still a JDM Star....BLK92_D16 Still a JDM Star....
iTrader Score: 78 reviews
Default

Was the block notched or the girdle for those H-beams? or was it necessary?
BLK92_D16 is offline   Reply With Quote Quick reply to this message
Old 07-08-2008, 03:16 PM   #13 (permalink)
D-series G0D
 
boostfreak0885's Avatar
 
iTrader: (13)
Join Date: Jan 2008
Location: delaware
Posts: 6,966
Rep Power: 20 boostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcano
boostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcanoboostfreak0885 is hot as a volcano
iTrader Score: 13 reviews
Send a message via AIM to boostfreak0885
Default

thought mostly all h beams had to notch the block and girdle
__________________
my new and improved build... check it out

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


best time so far
11.201 at 128mph with a 1.79 60 foot.. damn i need traction, best trap speed is 129mph. 26psi h1c

NEW best 60' 1.56!!!
boostfreak0885 is offline   Reply With Quote Quick reply to this message
Old 07-08-2008, 03:28 PM   #14 (permalink)
D-series G0D
 
BLK92_D16's Avatar
 
iTrader: (78)
Join Date: Feb 2006
Location: Greenville, SC
Posts: 13,322
Rep Power: 30 BLK92_D16 Still a JDM Star....
BLK92_D16 Still a JDM Star....BLK92_D16 Still a JDM Star....BLK92_D16 Still a JDM Star....BLK92_D16 Still a JDM Star....BLK92_D16 Still a JDM Star....BLK92_D16 Still a JDM Star....BLK92_D16 Still a JDM Star....BLK92_D16 Still a JDM Star....
iTrader Score: 78 reviews
Default

Quote:
Originally Posted by boostfreak0885 View Post
thought mostly all h beams had to notch the block and girdle
Exactly what I thought...but I see none on this build.
BLK92_D16 is offline   Reply With Quote Quick reply to this message
Old 07-08-2008, 05:46 PM   #15 (permalink)
D-series G0D
 
99EJ6T's Avatar
 
iTrader: (32)
Join Date: Aug 2005
Location: The one and only "BAY AREA", CA
Posts: 14,661
Rep Power: 45 99EJ6T is on a level you can only DREAM about! ! !99EJ6T is on a level you can only DREAM about! ! !99EJ6T is on a level you can only DREAM about! ! !
99EJ6T is on a level you can only DREAM about! ! !99EJ6T is on a level you can only DREAM about! ! !99EJ6T is on a level you can only DREAM about! ! !99EJ6T is on a level you can only DREAM about! ! !
iTrader Score: 32 reviews
Default

its notched. just not the normal way you guys have seen it. look at the way the bore is. you will see its not smooth "circle".

its just the person that did the notch did a very good job smoothing it out.



__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
99EJ6T is offline   Reply With Quote Quick reply to this message
Old 07-09-2008, 04:26 AM   #16 (permalink)
D-series lover
 
iTrader: (4)
Join Date: Dec 2007
Posts: 201
Rep Power: 12 JoeyOKC is trying to make new friends
iTrader Score: 4 reviews
Default

Quote:
Originally Posted by 99EJ6T View Post
its notched. just not the normal way you guys have seen it. look at the way the bore is. you will see its not smooth "circle".

its just the person that did the notch did a very good job smoothing it out.
it's a very smooth transisition.
__________________
LOL @ the same people who come out of the wood work to lecture about street racing.
JoeyOKC is offline   Reply With Quote Quick reply to this message
Old 07-09-2008, 04:31 AM   #17 (permalink)
formerly allnaturalrex
 
greasemonkey89's Avatar
 
iTrader: (14)
Join Date: Jan 2008
Location: A land before time
Posts: 4,639
Rep Power: 22 greasemonkey89 is the fucking MAN!!!!greasemonkey89 is the fucking MAN!!!!greasemonkey89 is the fucking MAN!!!!
greasemonkey89 is the fucking MAN!!!!greasemonkey89 is the fucking MAN!!!!greasemonkey89 is the fucking MAN!!!!greasemonkey89 is the fucking MAN!!!!greasemonkey89 is the fucking MAN!!!!greasemonkey89 is the fucking MAN!!!!greasemonkey89 is the fucking MAN!!!!greasemonkey89 is the fucking MAN!!!!greasemonkey89 is the fucking MAN!!!!greasemonkey89 is the fucking MAN!!!!greasemonkey89 is the fucking MAN!!!!greasemonkey89 is the fucking MAN!!!!greasemonkey89 is the fucking MAN!!!!
iTrader Score: 14 reviews
Send a message via AIM to greasemonkey89
Default

the build is coming along nicely keep it up.
__________________
"ALLMOTOR IS MY PASSION BUT IM FAT SO NITROUS HELPS PUSH THAT PASSION FOWARD LOL."


"Aircooled Enthusiast/ D-Series Fanatic"
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


Resident D-series.org metalhead Alliance member #2
greasemonkey89 is offline   Reply With Quote Quick reply to this message
Old 07-11-2008, 04:15 AM   #18 (permalink)
D-series lover
 
iTrader: (4)
Join Date: Dec 2007
Posts: 201
Rep Power: 12 JoeyOKC is trying to make new friends
iTrader Score: 4 reviews
Default

it doesn't look like the girdle was notched. I"ve rotated the crank around many times and it looks to have about 4-5mm clearance between the rods or rod bolts and the girdle. I pulled the oil pump off and did the porting on it. do people ever run aftermarket gears in the oil pumps? i know you can get aftermarket gears for the b-series.....dunno....
__________________
LOL @ the same people who come out of the wood work to lecture about street racing.
JoeyOKC is offline   Reply With Quote Quick reply to this message
Old 07-11-2008, 04:52 AM   #19 (permalink)
D-series soldier
 
1992Si's Avatar
 
iTrader: (1)
Join Date: Apr 2007
Location: Somers CT
Posts: 867
Rep Power: 13 1992Si is starting to learn the ropes1992Si is starting to learn the ropes1992Si is starting to learn the ropes1992Si is starting to learn the ropes1992Si is starting to learn the ropes1992Si is starting to learn the ropes1992Si is starting to learn the ropes
iTrader Score: 1 reviews
Default

Run the oem gears in the oil pump, there fine.
__________________
Best ET 9.85 @ 145.68MPH, 586WHP D16z6, best 60ft 1.54


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
1992Si is offline   Reply With Quote Quick reply to this message
Old 07-11-2008, 11:47 PM   #20 (permalink)
Member
 
KRITIK's Avatar
 
iTrader: (0)
Join Date: Jul 2008
Location: Westmoreland, Jamaica
Posts: 88
Rep Power: 12 KRITIK is nobody
iTrader Score: 0 reviews
Send a message via MSN to KRITIK
Default

GL with the build man..i'm stayin tuned for this
KRITIK is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the D-series.org forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


iconAll times are GMT -8. The time now is 06:17 AM. | Welcome to Forum, please register to access all of our features.