|01-02-2016, 12:00 PM||#1 (permalink)|
Join Date: Mar 2015
Location: Karachi, Pakistan
Rep Power: 0
iTrader Score: 0 reviews
Need Help regarding fueling
Before i was running turbonetics turbo on 20psi boost using 550cc injectors afr were 10.9-11.5 on Daily drive map,
Now i have changed the turbo to Holset HX35W and the fueling is ok till 14psi and at 20 psi afr is 12.4 as my tuner said. so the injectors are maxed out. anyone else running 550cc injectors on 20psi boost i.e identical setup ? do 550cc max out on 20psi boost ? or something is wrong with fuel filter ?
Engine is D16ZC block SRP pistons and Eagle rods with all other supporting mods and NepTune management.
|01-02-2016, 12:16 PM||#2 (permalink)|
Join Date: Apr 2010
Location: Oklahoma City
Rep Power: 17
iTrader Score: 3 reviews
There are several fuel calculators available, this one is from my site:
Fuel Injector Calculator | Fuel Calculators | Resources | DeatschWerks
550cc should be safe to fuel up to ~350bhp on gasoline. If you are exceeding that, then yes, the injectors aren't flowing enough.
'87 Civic Si
'91 CRX SiR
'91 Civic Tape-R
'91 Civic Wagon RT4WD
'03 Astro AWD
|01-02-2016, 01:11 PM||#3 (permalink)|
Join Date: Sep 2005
Rep Power: 24
iTrader Score: 9 reviews
The HX35 is also rated for 10-20% more flow & is more efficient, so it wouldn't be surprised if it's just maxing them out. 550cc is considered small for any Honda anyways, I wouldn't recommend more than 300whp for them. They can go beyond that at the risk of rising AFR's & non-linear response. Either get bigger injectors or increase fuel pressure. Doubling the pressure will increase flow a bit less than 50%, so for 10% more fuel you'd increase pressure about 25%.
If you're looking for something bigger but find shipping to be difficult, let me know. I've shipped injectors to several dozen countries so far.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Last edited by HiProfile; 01-02-2016 at 01:14 PM.
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|