fuel injectors install - D-series.org

Go Back   D-series.org D-series Knowledge Factory DIY Forum

D-Series.org is the premier Honda All Forum on the internet. Registered Users do not see the above ads.
LinkBack Thread Tools Display Modes
Old 11-26-2003, 02:47 PM   #1 (permalink)
Posts: n/a

Step 1: Check you injectors and be sure that they are the right application for your car.

Step 2: If so supplied, place the new 'o' rings on to the inlet side of the injector.

Step 3: Place a very light coat of oil or other lubricating oil on to the injector 'o' ring.

Step 4: Press the injector into the fuel rail. We found that if you gently twist as you are pressing the injector in, you will get a better result.

Step 5: If you press to hard or sometimes if you press directly in without twisting, you can pinch the 'o' ring.

Step 6: You will know it has been pinched if it feels as if it didn't 'press' into place. This causes damage to the 'o' ring If damage occurs, you will need to change out the 'o' ring.

Step 8: Reinstall your fuel rail onto the vehicle.
  Reply With Quote Quick reply to this message
Sponsored Links

Quick Reply

Register Now

In order to be able to post messages on the D-series.org forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

iconAll times are GMT -8. The time now is 05:35 AM. | Welcome to Forum, please register to access all of our features.