PDA

View Full Version : gude cam - "HCCS07"

turboedpickup
06-05-2007, 01:09 PM
is this a good cam - i've got a d15b7 z6im, I/h/e... ? it's spec'd at...

lift: .415/.421 duration: 241/228

just a street car -lookin for more power... yadda yaddda... valve train upgrades required??? from the site...

PART NO: HCCS07
DESCRIPTION: Awesome power!
POWER BAND 4000 RPM. to 8200 RPM.
IDLE: Good
SPECIFICATIONS: Intake LIFT - .415 DURATION - 241
Exhaust LIFT - .421 DURATION - 228
transzex
06-05-2007, 01:11 PM
no gude, Bisimoto Lvl 2
Toddnos
06-05-2007, 01:17 PM
Bill Gude products again....no customer support,,expensive,,id use JG,,others recommend BIsimoto..i like both.
jmar504
06-05-2007, 02:15 PM
how good are bisimoto cams... i was looking to get a cam but i was gonna get like a zex... or something...
SOHCinWA
06-05-2007, 02:18 PM
JG has real good street cams for sure.... But Bisi only sells power.. I woulndt go anywhere else.
sl@sh
06-05-2007, 02:48 PM
we did 147whp@115lbs torque on a mild d16a6 set-up...

using the Bisimoto Level2 with High rpm springs...
LiftoffOversteer
06-05-2007, 02:58 PM
we did 147whp@115lbs torque on a mild d16a6 set-up...

using the Bisimoto Level2 with High rpm springs...

/r/ more info.

I am looking to build a D15b7 to that kind of power. I already have DC 4-1 header, 62mm tb, Blox intake manifold, and a head waiting to be sent off to a machine shop. Just need the cam and valvetrain. If Bisimoto would do the headwork for a good price that would be nice.
SOHCinWA
06-05-2007, 03:02 PM
/r/ more info.

If Bisimoto would do the headwork for a good price that would be nice.

You are going to get what you pay for. No such thing as a "Good Price"..... If you want something that works you need to spend the $$$$. Port Flow does Bisi's heads. Although Bisi has his own specs for his heads. As with his camshafts.
shifty35
06-05-2007, 03:05 PM
You are going to get what you pay for. No such thing as a "Good Price"..... If you want something that works you need to spend the $$$$. Port Flow does Bisi's heads. Although Bisi has his own specs for his heads. As with his camshafts.

And no, he won't tell you what they are... lol.
sl@sh
06-05-2007, 04:28 PM
details on the 147whp is on a thread i made a while back in this forum...

should be doable.. on a d15b7, need a better header, good head, ur intake manifold is good, id go for a 60mm throttle,

and TUNING , u need it tuned good, Uberdata,Crome are the options i can think of, though i tend to lean on Crome cuz thats what we use...
Hondata sounds good too.. for a price hehe

sohcinwa is correct, "good price" does not exist, price tend to go up simultaneous to ur whp gain hehe, the higher whp the more it wud cost..
turboedpickup
06-05-2007, 05:23 PM
gotcha - some guy on h-t was selling the cam for 100 bucks... that's why... thank goodness i was here to check it out. but it seems to be bisi's stage 2 for me. no headwork though. i wonder if that'll be a problem.
sl@sh
06-06-2007, 06:51 AM
i believe Bigtuna ran 13.5sec with a stock a6 head, but with alot of milling..
and that was with a smaller crane turbo cam...