PDA

View Full Version : 1995 DX Swap ?


Friday13
06-02-2007, 10:56 AM
Will the ZC drop right in or do I need the Trans. too. And what performance parts do I buy I cant find any ZC parts

jlicrx
06-02-2007, 11:06 AM
buy the OBD1 DOHC ZC and it will drop right in - use your engine harness and everything will plug right in, with one possible exception - the 92-93 DX (not sure about 95) has the MAP sensor on the firewall and the OBD1 DOHC ZC has it on top of the throttle body - if yours is on the firewall, you will need to extend the wires for the MAP connector so that it will reach the throttle body - what kind of performance parts?

transzex
06-02-2007, 02:34 PM
to get the wiring to reach, unbolt the fuel filter from the firewall and pull out the wiring, it'll now reach with ease.

Green 91
06-02-2007, 04:55 PM
www.thezcr.com