Got a Question about a dizzy prob......

[Single Cam D]

ok so heres the question does a si dizzy bolt up right to my sohc zc vtec or how much modding is there??? also there is no way to run my stock dx harness, a pm6 ecu and a obd1 dizzy even if i did a sub harness to use the obd1 dizzy with my obd0 harness..... cause i saw a write up for it and thought it would work..A si dizzy for me is 170 and if it didnt work after i modded it i coulnt take it back so im trying to make this do able any help would help me thanks guys......

[jlicrx]

Si distributor will not bolt directly onto the SOHC ZC VTEC engine - you cannot use the OBD1 distributor with OBD0 ECU - if your car is a DX, you need to use the DX engine harness and make the DPFI to MPFI wiring changes to it - to run the VTEC engine correctly, you really need to convert the car to OBD1 - the VTEC OBD1 ECU will change the fuel and ignition timing to match VTEC engagement, which you can't accomplish with the OBD0 ECU

[Single Cam D]

thing is a have a chipped pm6 ecu to run my vtec.....Two ryan just told me it will fit up but i have to hog the holes out to get the timing right so ill use the si dizzy....