My Boosted EJ1

[civic_ex_95]

http://i114.photobucket.com/albums/n241/civic_ex_95/newsetup.jpg
http://i114.photobucket.com/albums/n241/civic_ex_95/polishedmanifold.jpg
highway video pull 3-5 60-150mph. i tried to get a view of the spedo but didnt quite show up top of 3rd gear is right a 110, 4th is 130 with me shifting at ~8200
http://i114.photobucket.com/albums/n241/civic_ex_95/th_65-150.jpg (http://s114.photobucket.com/albums/n241/civic_ex_95/?action=view&current=65-150.flv)

Motor:
d16z6 bored .020" over
wiseco pistons w/ coated skirts
eagle rods
calico coated race bearings
arp headstuds
oem headgasket
micropolished and balanced crank

Head:
Crower springs and ti retainers
full port and polish
oem valves

other stuff:
walbro 255lph intake pump
dsm 450cc (for now)
aem fpr
custom lps 4-2-1 manifold
t3/t04e 50 trim .48 @ 15-17lbs
tial 38mm wastegate
hks ssq bov
22x9x3 fmic, 2.5" ic piping
engine runup water injection kit
hondata s300 street tuned at by me
greddy profec b spec 2
ngk wideband
gm 3bar map sensor
full 3" exhaust with magnaflow muffler
act xtreme street disc and 11lb flywheel

thats about all i can think of for now... havent had time to get to the dyno and track but shouldnt be long since schools almost out. im very impressed on how it runs so far. let me know what you guys think?

[mwsol96]

crazy looking manifold, good stuff!

[eg4door]

good shit

[shocker911]

yea that is a insane mani where you get that thing? good boosted car tho

[CrazyConscious]

Nice video, welcome to the site. Does that manifold actually serve a purpose?

[Agent T]

dude that mani is absolutely killer :TU:

[1990reds13]

did you make that mani yourself? it looks badass man

[civic_ex_95]

thanks for all the comments! the manifold was built by Linder Power Systems. the idea was to try and make the manifold spool like a log but still flow enough air to make power at high rpm. it seems to work very well. i will try to get some better vids this weekend.

[Agent T]

how much did that mani cost? especially being custom

[freidaddy]

nice :TU:

[H2Bcivic]

nice setup! do u have any times for it?

[civic_ex_95]

i work there so i got a killer deal on it... i can ask him tomorrow if your interested... no times yet. hopefully high 12's on street tires... just depends how good i can get it to launch. i might be able to get up to the track next weekend. ive been super busy working and trying to finish up school. thanks for the comments

[civic_ex_95]

i work there so i got a killer deal on it... i can ask him tomorrow if your interested... no times yet. hopefully high 12's on street tires... just depends how good i can get it to launch. i might be able to get up to the track next weekend. ive been super busy working and trying to finish up school. thanks for the comments:TU:

[civic_ex_95]

got a new wastegate spring today running a big 11 psi spring and a small 3.5psi spring. got some rotary 550cc injectors. re-street tuned it at 20psi. my buddy hit the track here two weeks ago and ran a 11.53 on pump gas not a d-series though!

url=http://videos.streetfire.net/video/a94c9e43-8c25-48eb-bf02-993e01329980.htm]http://thumbs.vidiac.com/a94c9e43-8c25-48eb-bf02-993e01329980.jpg[/url]Click here to see Video (http://videos.streetfire.net/video/a94c9e43-8c25-48eb-bf02-993e01329980.htm)

[H2Bcivic]

i wanna see some vids of ur car at the track!

[myHonda1]

sick!

and that manifold is crazy!

[civic_ex_95]

i wanna see some vids of ur car at the track!

ya it wont be long. i have 1 week off school left then i should be able to run on street tires. but im trying to save up for some slicks! hoping for an 11 sec pass on slicks...

[jdm2000civic]

sexy...and welcome!

[AllMotorDPower]

nice setup i dig the mani :) welcome to the site

[ardevas09]

that manifold is tits!

[civic97]

i wanna see some vids of ur car at the track!

x2 and nice mani......how much hp are you putting down?

[civic_ex_95]

should be hitting the track tomorrow night.. pics and vids should be up shortly after. no idea what the #'s are? ~350-375????

[ZackieDarko]

150 in a EJ1

you sir have balls

[EP3Moschini]

if you work for Linder Power Systems. . . I smell a group buy in the making on that manifold. . . :TU:

[civic_ex_95]

the owner says that when we re-do my car with a bigger turbo. that he can possibly do a group buy on that manifold, because it will be a better design. im planning on using a borg warner s258...

[civic_ex_95]

well #'s werent as good as i had hoped... track was preped poorly but i ran consistant 13.7 at 109-110. hopefully with some slicks i can hit low 12's. i was using some 205/50/15 proxes4 tires. spinning till 65mph with pretty bad wheel hop... hopefully get a video up tonite...

[amarok]

well #'s werent as good as i had hoped... track was preped poorly but i ran consistant 13.7 at 109-110. hopefully with some slicks i can hit low 12's. i was using some 205/50/15 proxes4 tires. spinning till 65mph with pretty bad wheel hop... hopefully get a video up tonite...

Get some more vids up! I love it. Ill have to look into someone making me a manifold like that, Unless we get that group buy goin.

[vtecencrx]

nice mani :TU: