Engine and tranny Swap help

[LMandCS]

I need someone's help on this. i have a stock D15B7 with stock P20 tranny and I have a B16A2 V-Tec with S4C LSD tranny i'm going to drop in it. I've read everywhere that the B16A2 will bolt right in but i'm not sure about the tranny can someone help me with this it's stopping me right now I have the B16A2 with tranny right now and i want to know what i need to do to drop the tranny in with the B16A2.

[Sexicivic2000]

what are you trying to put it in ?

[transzex]

try www.b-series.com

[mojoman]

try here http://hondaswap.com/

[sirhatchy]

yes it is a direct bolt in swap.
i assume you have a 5th gen dx.
which is hydrallic.
you just need the rear tranny bracket from a 95 integra gsr.
and all the b16 mounts.and shift linkage.
run vtec wires. obd 1 p28 ,p72 or the obd1 b16 ithink its p30 or pr3

[LMandCS]

I have a 92 Civic LX With a Stock 1.5 SOHC with 102 HP and stock P20 Tranny i read that they only came with hydraulic trannys but don't know if it's true or not. but i want to swap the stock engine and tranny with a B16A2 engine and the tranny that came with it which is a S4C LSD tranny and i want to know what all i need to do to get it to work.

[Jaime 88dxb18]

Axles, ECU, all B16a mounts, adjustable shift linkage, and lot's of research.

[Haysoos]

You probably aren't gonna get much help here cause this is where people go when they DON'T do B-swaps. Not saying people are being dicks and not helping just to be jerks, thats just not the type of thing discussed 'round these parts. Would you expect good answers if you went to a BMW repair shop and asked about VW?

I would recommend www.hondatech.com, theres a lot of flaming, but its the only place I know of to get good info on B16 swaps.

[sirhatchy]

forget what everyone else tells you..I am on my 7th civic
I had 3 5th gens..
4 cars ago I had a 95 civic dx coupe with a b16a2 swap.just read my thread thats all you need....all 92 and up (civics) are hydraulic.
any other questions just ask...

[sirhatchy]

dx and lx both have the same motor and tranny

[sirhatchy]

oh yeah you have to use b series axles