throw bearing question?

[remoer]

well i've heard many horror stories about throw bearing so i'm going to keep it simple which one do i need? here are the two pics.

#1?

http://www.hondaautomotiveparts.com/auto/jsp/mws/catimgs/13sh20_m03.gif


or #12?

http://www.hondaautomotiveparts.com/auto/jsp/mws/catimgs/13sh20_e18.gif

on another question how many flexplate bolts do i need?

[workinprog]

i beleive number 12 is a pilot bearing while number 1 is the throw out bearing.Where did you get this diagram?

[remoer]

majestic honda, i knew that one was the throw bearing but as in was checking at anther section i saw the second pic and i had to ask cause all it said was clutch pilot bearing.

[mojoman]

I'm not sure what you are doing, but you should replace both bearings when you do your clutch. you do not want flex plate bolts (for auto), you want number 8 flywheel bolts and there are six of them

[remoer]

I'm not sure what you are doing.

"i'm building a doomsday machine, i'm gonna aim it right up your hinney hole." *Cooter*

why do i remember lines from movies. lol. i've never said it was for an auto. maybe i should point out the i need #10 of the second pic and how many of them.

[gearhead98]

6, i think

[mojoman]

flexplate is auto, pressure plate is manual, yes you need 6 of them and they are torqued to 19 ftlbs

[transzex]

pressure plate bolts, need 6.

[remoer]

hey bones thanks, which one i need #1, #12 or both?

[_CXhatch_]

if your changing your clutch you should change both of those bearings

[DirtyDC4]

Shouldn't NEED to change the pilot bearing unless it's acting up. It doesn't hurt to change it if you're changing flywheels.