Chamber volume D15Z6?

[vtec08]

Does anybody know combustion chamber volume for D15Z6 engine (114 hp) - EDM?

[ArmyD15z6]

hi

i have z6 too.... for what do u ask the volume..? :-)

[Al3ert]

D15Z6 here too ;) Same Head as the Y5 (~Y8 casting) so 32.80 cc

Planing on get high cr?? With the P2P pistons, the cr should be at 11.58 , but i read a few days ago from Bone, that the deck height at zealAutowerks page wasn't correct :(

[vtec08]

Yes, I planing some changes and maybe high cr :p ?

2Al3ert: Are you 100% sure for this volume 32.80 cc on D15Z6 head?

Deck height must be 207.45, but I'm not sure (this info I have read).

2ArmyD15z6: Did you put skunk IM 67 mm and TB? How much is the gain?

edit: I think that calculator on zealAutowerks page is not correct. I found two other calculator http://www.c-speedracing.com/howto/compcalc/compcalc.php or http://www.knology.net/~jediklc/D.htm

[transzex]

Zealworks IS correct, Knology is fubared

http://www.zealautowerks.com/dseries.html

[vtec08]

Zealworks IS correct, Knology is fubared

http://www.zealautowerks.com/dseries.html

I don't know this word "fubared", what this means?

edit: It's OK, I found meaning of this word.

[jdm ek]

not sure how to use the calculator, what would a d15z6 engine running a z6 head and vitaras run, and what headgasket because i want pistons and rods that fit my engine but am struglling, probably going to be going down the custom build root as i only need to find somewhere to make rods for me now.

[Al3ert]

Y8 head is a P2J, same as d15z6 head. The differences are the camshaft and rockers.

In fact, if you use the Zeal calculator, D15 block, Y8 head, P08-010 pistons,etc.. You get 9.68, which is what a stock d15z6 has (9.6 in car papers)

[ArmyD15z6]

2ArmyD15z6: Did you put skunk IM 67 mm and TB? How much is the gain?


eh eh ASAP ... sure i'll show you