Sway bars install

[kit88]

Hello, I own a del sol S 93, it has no sway bars, I already have a set of oem del sol si sway bars, but I need to know how to install it.

Does any one have pics of yours oem sway bars installed??, pictures could help me a lot.

[kit88]

I need pics.....

[s_18]

Here's my EJ...

Front:
http://i16.photobucket.com/albums/b25/s_18/DSCF0552.jpg

Rear:
http://i16.photobucket.com/albums/b25/s_18/Dsc02419.jpg

Not sure if this helps at all. Do you have the end-links? And do you have LCAs with mounting holes for swaybars?
If not, you need to get ahold of a set, both front and rear.

[kit88]

Thanks bro, I have front lca´s and I will get links, but on the rear I´m going to do the disk swap, already got the pieces, I think that the lca´s from this disk swap are good for sway bars.

Can you confirm if I´m rigth ???

Also do I need links for the rear sway bar???

[superdewey58]

http://i44.photobucket.com/albums/f1/superdewey58/P1010628.jpg
http://i44.photobucket.com/albums/f1/superdewey58/P1010613.jpg
http://i44.photobucket.com/albums/f1/superdewey58/P1010612.jpg

[kit88]

Thanks, lot of help

[PianoMan]

Make sure your front LCA's have a mounting point (around where the pics in the thread show them) - though the Sol's LCA's are slightly different. The '93 del Sol S didn't come from the factory with a sway, and have different part numbers for the LCA's than the rest of the model line. Same with the rear - make sure you've got the mount points. Only the DOHC Sol came with the factory rear bar and compatible LCA's.

Which sway bar set are you installing? I know the Eibach kit came with endlinks for the front, but required existing OEM links for the rear.

PM

[kit88]

I have front lca´s from a del sol Si, and rear lca´s from an acura 94

Hope it works

I need pictures more clear where the sway bars front and rear conect to lca´s

[hyjnx]

so if i get an OEM sway ( i have a 96 ex sedan) like an Oem rear ek SI sway...how would it attach in? would i need new LCA's? thanks in advanced (sorry to steal thread)

[Ukrainamese]

if you got it from the ek/ej/em1(6th gen) Si (SiR Canada), all you would need (correct me if i'm wrong) is the sway bar, endlinks, d-brackets from it plus bolts, nuts, etc.

[hyjnx]

is it a direct swap in though? same with the del sol rear sway? i wanna make this simple as possible. ive heard it is but i just need some confirmation on my information thanks!

[Ukrainamese]

yes, since you said you have a 96 ex sedan (6th gen), the sways bar from the Si (SiR Canada) will bolt right up

[PianoMan]

kit88 here a closer pics:

Front LCA endlink mounting point:

http://i96.photobucket.com/albums/l171/chrisngem/DSCF5339.jpg

http://i96.photobucket.com/albums/l171/chrisngem/DSCF5338.jpg

http://i96.photobucket.com/albums/l171/chrisngem/DSCF5337.jpg

Rear LCA endlink mounting point:

http://i96.photobucket.com/albums/l171/chrisngem/DSCF5336.jpg

http://i96.photobucket.com/albums/l171/chrisngem/DSCF5335.jpg

Looks like you're well on your way. Just make sure you're LCA's look like these, and you'll be set.

hyjnx, I think you're good to go.

PM

[IanB]

^^That's exactly the setup I'm hoping to have by mid-summer!^^ Looks great, did you leave the stock bushings, how's it ride?

[hyjnx]

now what about parts? i have the stock EX rear LCAs and i was wondering what id need for frame bushings and endlinks...are they gonna be off the SI too?

PnT

[hyjnx]

https://www.hondapartsdeals.com/images/hp_parts/13S020.010.3.gif

im guessin that i need part numbers

27, 31, 32, 33, 34, 28, 35, 36,

and number 30 is a stabilizer bracket do i need that too? thanks guys!

[PianoMan]

You'll need the stabilizer bracket - check your rear subframe and see if they're attached, just in case.

Don't forget about the sway bushings and brackets (28, 29).

For IanB: finally got it all on. LOVE the ride. Just slightly stiffer than OEM, rides smooth, and now with the 26mm front sway, corners FLAAAAT!!! Moderate drop (1.25"), and well worth the money!

PM

[hyjnx]

well those i could get from energy suspension

[kit88]

Piano man you are the man.