0bd0 eh hatch w/ d15z1 what dizzy?

[gloryhog]

the car came with a 0bd0 dizzy w/ one bolt in it. the d15z1 is 0bd1 the car is wired for 0bd0 from what I know. does any body have any help? do we need to wire the car for the d15z1 and put a obd1 ecu in or is there a way to make it work the way it is?

[transzex]

what motor and what car do you have?

[gloryhog]

its a 91 hatch with a d15z1 vtec(E)

[transzex]

your stuck with the one bolt setup.

You'll have to "HACK" the leg to get the second bolt in and be able to adjust the timing.

[mintchoc91]

will cutting and drilling that leg work??? i have the same car as him with the same motor, and the same dizzy problem

[gloryhog]

we ended up putting a d15b7 head on the z1 block so we could go buy a stock 0bd0 91 dx dizzy and it bolted up perfect harness plugs right in . no oil leaks , many o' late nights experimenting with diff. setups and this one worked great.
-92 z1 block
-93 b7 head
-91 b8 dizzy
-95ex timing belt
-b8 intake, exaust
-96 y8 head gasket
-had to trim up the timing belt cover a little on the front so the belt would clear!!!