PDA

View Full Version : need some help boosting question


bpotts900
03-06-2007, 12:22 PM
alright I have a 94 civic coupe dx with a d16y8
the motor has je pistions and eagle rods, I'm using a t3/t4 turbo with intercooler the whole works. now if I get bigger injectors ( idk how big) can I turn the boost up to anywhere from 15-19psi. i also understand i need a different mapp sensor. can I possible get 350-375 out it on stock sleeves. thanks.

hatchnthoughts
03-06-2007, 02:28 PM
theres guys on here pushing over 400 stock sleeves so i dont think 350ish shouldnt be a probem as long as the car is tuned properly... also it depends on which t3/t4 you have. what map sensor/injectors/management are you using now

bpotts900
03-06-2007, 02:58 PM
factory map, i was going to 450 if that is not overkill, im currently using crome pro

udumkid
03-06-2007, 03:13 PM
you need the 2 bar Gm map sensor.

hatchnthoughts
03-06-2007, 03:26 PM
450s might be small for 350+ whp. also check the efficiency range on your turbo to make sure it will make the power you want. re-tune for sure

bpotts900
03-06-2007, 06:12 PM
so 750s are best bet?