Need info

[beater90]

Hey everyone, Im looking for info on custom built wiring harnesses for a D16Z6 swap into a 90 Civic DX hatch. I've found a place called Rywyre, but they want me to ship them my harnesses and then pay for shipping them back to me. Anyone know of a reputable place that just sells them already built plug and play?

[udumkid]

http://cgi.ebay.com/ebaymotors/OBD0-OBD1-ECU-CONVERSION-HARNESS-JUMPER-HONDA-RYWIRE_W0QQcmdZViewItemQQcategoryZ33598QQihZ004QQi temZ140089589696QQrdZ1QQsspagenameZWD1V

[beater90]

thanks, really appreciated Udumkid. That's waaay cheaper...lol

[udumkid]

no problem

[Single Cam D]

That or just splice it urself.Run a wire to pin b3 on your ecu for vtec then run two more wires from dizzy plug to the last two injectors then get a resistor box its as easy as that.Im doing the same thing in my 91 hatch dx.

[beater90]

I was going to try and wire it up myself, then just run an rpm switch, untill I learned that sure, the vtec would work, but the engine would run waay rich without the obd1 computer to control a/f mixtures with the vtec switch.