Alright LSD for a D16A1

[Anonymous]

yes i have an A1 it's stock in the 89 integra's, which I also own. I'm not new to engines or cars but I'm not so clear on what transmissions bolt up to this engine. I found an LSD from JDM land and I wanted to know if it would fit in my D16A1 transmission.. sorry I do not know the Tranny code for this car.

the LSD is out of a 90 EF7 CRX ZC. Anyone know if this will fit in the stock tranny that is bolted up to my D16A1 right now.

Any help would be great.

Thanks,
Scott

[-TJ]

I'm not sure about the LSD issue - I know that there are LSD's available for that tranny (the code is CG) because Jamie Houseman of Houseman Autosport (www.racegearbox.com) uses a CG tranny in his GT4 roadrace CRX. He may be running a Quaife?

As for what transmissions fit the D16A1, any "d-series" tranny will bolt up to the block - L3, S20. However, the mounting to the early integra chassis will have to be custom fabricated.

[3gciviczc]

Can I know what is the diferrence between the L3 and S20 tranny. Interms of gear ratio etc...

[strudel]

Ask your question at http://www.g1teg.org/phpbb/ They will know the answer to that one.