For Those who wonder Delta 282 Specs!!

[Drag4life723]

Here ya go i have got a lot of questions about the specs on my delta can i got the delta 282 grind it was $117.00 thats with shipping both ways and i also got a delta cams shirt.

so here my spec sheet!

282 grind:
205 duration
260 cam rise
390 lift

so for thos who were wonder there ya go!!

RC

[devere]

Good shit! I didnt even get spec sheet with my 282! Although i did get the t-shirt, calendar and note pad!

I have the 282 as a back up as ive just got the bisimoto level 3 cam in my engine.

Let us know how the 282 runs though, i might need to put it in if i dont get tuned asap!

[13BTOY]

How do you like the cam? Do they recomend any other mods with it?

Thanks, Ed

[transzex]

info is worthless.......

205 duration at what lift????
260 cam lift, is that the lobe difference
390 lift, likely at the valve.....seems they used Chevy 1.5 rocker ratio.

[Drag4life723]

info is worthless.......

205 duration at what lift????
260 cam lift, is that the lobe difference
390 lift, likely at the valve.....seems they used Chevy 1.5 rocker ratio.

im sry i ment

260 cam rise if u dont know what that means its ok
and 205 duration at 390 lift ur welcome sry to afend u its for those who wanted to know not for those that dont care. thank

RC

[K2e2vin]

260 cam rise= 260 degrees of lift or overall duration? 205 degrees of .390 lift???

The way you stated it didn't really make much sense at all.

[lilryanadamse]

i am confused too. i think you know what you are saying, just not saying it right. when i called them, they said the specs for each cam were a little bit different depending on what core you sent them.

ryan

[Drag4life723]

260 cam rise= 260 degrees of lift or overall duration? 205 degrees of .390 lift???

The way you stated it didn't really make much sense at all.

thanks for the corection i just thought i would try and do some people a favor and post up what the told me over the phone. sry for the confusion!