Which throttle body is best

[burnoutboy]

I have a D16Z6 and I wanna get a throttlebody on the cheap, any suggestions?

[Speedjunky01]

im going for the b18b and protmatching it to the intake manifold

[burnoutboy]

exactly how much portmatching are we talking, Dremel gonna be enough?

[modsHXcivi]

I have a D16Z6 and I wanna get a throttlebody on the cheap, any suggestions?

B-series TB will work


exactly how much portmatching are we talking, Dremel gonna be enough?


Port match the intake manifold to match the TB. Not much porting and a dremel will work

[Speedjunky01]

its taking 2mm off around he perimiter of the whole IM.

2" flaper wheel 60 grit from home depot and a dripp and an extension. then polish the IM really well with a compoint of sanpaper on the inside.


how to:

http://www.sohchonda.com/forums/my-DIY-Intake-manifold-to-TB-port-match-t4037.html

[transzex]

I have a D16Z6 and I wanna get a throttlebody on the cheap, any suggestions?

any other supporting mods?????

if not it's not gonna do anything :)

[Speedjunky01]

any other supporting mods?????

if not it's not gonna do anything :)

throttle responce???

[Chiovnidca]

I have a D16Z6 and I wanna get a throttlebody on the cheap, any suggestions?
Junkyard?

[burnoutboy]

Intake, exhaust, headers. I'm just looking for improved throttle response and maybe a few ponies if I'm lucky. I'm looking at a ported and polished 68mm B18 throttle body on ebay for dirt cheap.

[Speedjunky01]

Intake, exhaust, headers. I'm just looking for improved throttle response and maybe a few ponies if I'm lucky. I'm looking at a ported and polished 68mm B18 throttle body on ebay for dirt cheap.
thats is WAAAAAAAAAAAAAAAAAAAAY to big.

even the type R 62mm is pushing it on being way to big. 60mm will more then sufice.

the bigger it is the slower it will flow you need to find a right combination of both velovity and volume 60mm is just right IMO.

[Hellhatch]

Get a 60mm tb off a b18, b16, h22 or h23. Place the gasket of the corrasponding tb you get and trace the opening on the manni and dremmel or flapper wheel it to the marks you traced.

[burnoutboy]

thought 68 sounded HUGE!

[remoer]

here ya go.... for the umm-teen time.
http://www.d-series.org/forums/showthread.php?t=37901

[jimmyb34]

68mm is way to big for sohc's.... 62mm is about as big as you want to go

[remoer]

68mm is way to big for sohc's.... 62mm is about as big as you want to go

nah a 100mm would fine.... baller.

[jimmyb34]

nah a 100mm would fine.... baller.

baller is running 4 tb's... liek how im about to be shortly and if im not mistaken you too.... lol

[remoer]

baller is running 4 tb's... liek how im about to be shortly and if im not mistaken you too.... lol

that is fur shur, playa. lol.

[naterpatater77]

would a 64 be too big for boost??