Injectors Problem????

[3gciviczc]

After installing the injectors given to me by my friend which is from a B20A engine into my DOHC ZC (brown top). I find that when I rev up the car, I found the car rev up slower then when it was using its stock injectors. Especially when its rev above 5000rpm. Can anybody help/tell me whats going on???? My ecu is OBD-0 and is from the 1st gen. teg. :?

[Jmorin]

After installing the injectors given to me by my friend which is from a B20A engine into my DOHC ZC (brown top). I find that when I rev up the car, I found the car rev up slower then when it was using its stock injectors. Especially when its rev above 5000rpm. Can anybody help/tell me whats going on???? My ecu is OBD-0 and is from the 1st gen. teg. :?

Try getting some info off thezcr.com ,I am not sure about b20a but did you look over the injectors,I might try using some injector cleaner or get some new injectors.

[infinatenexus]

what size are the injectors you got, and what size are the stock ones for your motor?

[3gciviczc]

Sorry fellas, not to sure bout the B20A injectors size. The injectors were send for cleaning and flow tested, the test result was OK for the injectors. The stock injectors was from a 1.6DOHC model. :?:

[3gciviczc]

Sorry fellas, not to sure bout the B20A injectors size. The injectors were send for cleaning and flow tested, the test result was OK for the injectors. The stock injectors was from a 1.6DOHC model. :?:

[Jmorin]

thezcr.com has zc manuals and part #'s get that and look for the injector size also the manual can help you and later use.