PDA

View Full Version : 4 bolt hub replacement

SOHC_STUDENT
12-12-2006, 06:24 AM
I swapped in some rear disks from an SI. Unfortunately the driver hub rear wobbles a bit. It's driveable but annoying, since this was supposed to be an upgrade.


Anyway, what are the chances I can replace the hub and fix the wobble? Would one of the hubs from my drums swap right in or do I need a hub from an SI?
ryan89crx
12-12-2006, 07:07 AM
sounds like you need a new wheelbearing
ILikeShinyThings
12-12-2006, 12:16 PM
the hub and wheel bearings are one unit from the parts store! only 80 bucks.

also bearings from the drum brake hub do not fit. I tryed that after my swap.
SOHC_STUDENT
12-13-2006, 06:46 PM
the hub and wheel bearings are one unit from the parts store! only 80 bucks.

also bearings from the drum brake hub do not fit. I tryed that after my swap.

awesome just what I needed to know

thanks dudes!