Intake mani suggestions needed

[TurboCivic95]

Im going to be running sleeved Z6 with all the internals done etc., and im just curious on your opinions on what is the best intake manifold i should run for the assload of hp that the car will be making. Thanks in advance.

[Bizzar]

custom.

[lkailburn]

i wouldn't worry too much about it. run the oem y8 mani. or make a custom one (which takes a lot of knowledge on dynamics to make effective)

otherwise seriously don't worry about it. get a bigger tb and bore out the im a little.
but people make assloads of hp on damn z6 IM's lol

-Luke

[ryan89crx]

Edelbrock :TU:

[B20BbenN]

Edelbrock :TU:

X2 :TU:

Some people have 400+ hp with the stock Z6 IM......Edelbrock IM have a very big plenum(way bigger than a sk2 IM) and big straight runner!

edelbrock IM FTW!!!!

[JoelAllenClear]

Edelbrock :TU:

x3 ... I just wish they made a Victor X for the D16 instead of the Performer X. Either way, the Edelbrock Performer X would best suit your setup.

[Hellhatch]

Edelbrock.