PDA

View Full Version : sway bars price and fitment.

magnumera
12-06-2006, 02:38 AM
will sways off of a 95 four dour integra fit on my 98 DX hatch.Just wondering do i have to change the endlinks or the stock ones off the integra will fit. The front or the rear, which will make the most difference in my car i dont think my car has any sways on it. And how much you think these should go for. thanx everyone for helpin me out! Really need to know.
ILikeShinyThings
12-06-2006, 07:40 AM
No and this has been asked before. Use search.
magnumera
12-06-2006, 02:27 PM
i remembered reading it on honda tech that it will fit but i have to use the integra front lca's also, but kinda puzzled in the back b/c hondatech guys say it will bolt up fine b/c its stock. Heres where i heard this from www.honda-tech.com/zerothread/1794133. but i heard here that i have to get the SI endlinks in order to run the integra rear sways. I wanted to verify because i don't know if its a bunch of bull.
ILikeShinyThings
12-07-2006, 11:19 AM
Rear sways from a 94-00 integra will fit on a 92-95 civic, but not 96-00. The front sway bar has a clearance issue with the front cross member and the exhaust/shift linkage between integra and civic chassis. The rear sway bars, I forget the actual reason behind why it doesnt fit (I tryed it on my 98), are not interchangable between 94-00 integras/92-95 civic's and 96-00 civics. I think they can "go on the car" with some fudging but it wouldnt be worth the trouble. The 92-95 civic front sway bar will fit a 96-98. LCA from an Integra will fit on the civic but the mounting bracket will not, so just swap on the civic mount and your good.

i remembered reading it on honda tech that it will fit but i have to use the integra front lca's also, but kinda puzzled in the back b/c hondatech guys say it will bolt up fine b/c its stock. Heres where i heard this from www.honda-tech.com/zerothread/1794133. but i heard here that i have to get the SI endlinks in order to run the integra rear sways. I wanted to verify because i don't know if its a bunch of bull.

I have heard that before but by the time you order the SI endlinks and such all you have is a puny rear sway. get an aftermarket one. there are tons of options and some are down right cheap.