PDA

View Full Version : Car Stalling Problem


Diablo
10-06-2003, 05:17 PM
Hey, what's up everyone, having a problem here, hope someone can help me better understand why, first off, here is the thread to help you in knowing what is in the motor:

http://www.d-series.org/viewtopic.php?t=83

Here's the problem, ever since the motor has been built and put in, I was having this MAP senser problem but I fixed it by soldering the wires for the V-AFC, problem solved, I took the car out for a test drive to make sure that everything was fine and it stalled right out on me, got it back to my shop and checked all the spark plugs, all were soaked with fuel, also note that fuel pressure was up at 40psi at idle. I lowered the fuel pressure down to 30psi, took it out for a drive again and everytime my air/fuel guage went to a lean condition, the car would lose power and want to die, took the plugs out and guess what, soaked with fuel.

The Question: The car is not tuned yet, would the V-AFC have somthing to do with it or is my problem something else?

Also compression on all four cylinders is 180 psi on the mark, and the spark is okay, so it is niether of those.

So throw your ideals out and lets see what happens, thanx.

SilentWrath*
10-06-2003, 07:56 PM
Id say itd have to have something to do with the vafc, what are your settings??? are you adding alot of fuel???

are you sure its soldered properly???
im not too sure from the description, lets hear other comments too

Diablo
10-06-2003, 08:06 PM
That's what I'm thinking, the V-AFC is just set to factory right now, still needs tuned. I agree, too much fuel.