what sensor are these on d16z6 intake manifold

[93delsolvtec]

wondering what sensors these are....i cant get them off for my new obx manifold...and does anyone know how much they cost
http://i57.photobucket.com/albums/g240/juneyour/DELSOLGOKART016.jpg
http://i57.photobucket.com/albums/g240/juneyour/DELSOLGOKART015.jpg

[transzex]

IAT and pruge solenoid

[93delsolvtec]

thank you...rep for good info

[93delsolvtec]

do i really need the purge soleniod? and ball park, how much for these sensors

[überTUNED]

best bet is to find another used one but it doesnt have to b bolted to the IM just snap the part around the screw off,, or take a dremel to the top of the screw...

[JHTUNING]

yeah its intake air temp. and purge , and yes the purge will make your car idle nice with a p28 ECU i asume since the Po8 its a d15b

[JHTUNING]

the IAT isnt that much and or you can get one from any d15-16 and just brake the purge off if the screw wont come out , use some vide grips on the sides that will prolly work

[93delsolvtec]

its a p28 d16z6 not d15

[überTUNED]

have fun mang, that purge sylinoid(SP*) can even b found on the firewall of a OBD-0 car, go get one from the junk yard, or like i said or like JHtuning said, BREAK THE FUCKER OFF!!!

[93delsolvtec]

im really thinking about leaving it on the manifold and buying the iat and solenoid new....im going to be selling the manifold and dont want to sell without the sensor or some broke piece there going to have to tap out...i dont try to sell garbage....and im not big on the junkyard for things like this, never know what your going to get....im just curious to hw much they are from a autozone or checkers

[whitesol]

I know the purge solenoid is over $100. I just drilled out the screw on the thing and replaced it with a new one on the new manifold.

[shaundrake]

Vice grips and don't be a princess; the junkyard is your best bet.