the time has come....

[jimmyb34]

well starting this weekend hopefully im going to be buying things for my turbo build.. started finding prices etc so far tonight.. but having trouble picking out a clutch/f;ywheel combo, fmic and piping.. but thats about it...

looking to run the following so far at 20-25 psi in my hatch.....
t3t04e 60/63
full ramhorn, 3 in dp, 3in exhuast
38 mm wastegate from blaastperformance
arp studs, cometic hg
either tuner toy or eagle rods
vitaras or srp's depending on budget...
rc 750's
obx lsd

if funds allow....
edelbrock intake
crower valvetrain....

all will be tuned with crome pro

if anyone has any ideas for a decent sized fmic and some piping thatd be great...
also not really sure what im looking for when buying a clutch... as far as being streetable...

any other suggestions, comments etc are welcome...

[ryan89crx]

ooh, fun!!

FYI, the blaast WGs are the same as the XSpower ones. you can get them cheaper on ebay

[jimmyb34]

ooh, fun!!

FYI, the blaast WGs are the same as the XSpower ones. you can get them cheaper on ebay

well thats good to know.. i was actually looking into an ssaut bar and plate fmic... but id like to read up on them a bit first.. but they are fricken huge.. i dont want to not have a bumper lol

but im pretty much clueless on what clutch to run....

[Special K]

Act Xt-ss

[vtecduck]

It's about damn time Jimmy :lol:. I like my act clutch and clutch masters flywheel. They didn't have the act flywheel when I got mine or I would've gotten it instead. Very easy to drive, the clutch pedal is a little stiff, but nothing major.

[ryan89crx]

well thats good to know.. i was actually looking into an ssaut bar and plate fmic... but id like to read up on them a bit first.. but they are fricken huge.. i dont want to not have a bumper lol

but im pretty much clueless on what clutch to run....i bought my new IC from justintercoolers on ebay. its pretty nice

im going to be running a Comp Clutch stg4 6 puck sprung :TU:

[jimmyb34]

got a link by any chance?

[Levi]

remember, if you change your mind on this I am going to cocksmack you. good luck jimbo.

[jimmyb34]

hey ryan.. i found those fmic's.. i am gonna grab one of those along with their piping kit i think.. thanks!!!!

[ryan89crx]

got a link by any chance?http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=230052243506&ssPageName=STRK:MEWN:IT&ih=013

[jimmyb34]

what is the difference between a stage 1 and a stage 3???? considering they are rated for about the same hp numbers.... and 1 cost 200 bucks less lol

[Clutchmaster]

have fun.....the FMIC and piping i got from ebay are pretty good looking nice size

[modsHXcivi]

Well its about time Jimmy keep us post ...

[civic97]

good luck with the build. sounds like fun and its about time!

[Bizzar]

Clutch Specialties from LSD Motorosports FTW! http://store.lsdmotorsports.com/merchant2/merchant.mvc?Screen=CLLP&Store_Code=LSD01&Car=Honda

I beat the shit out of mine daily and its still holding rock solid. Cheap as hell too.

[gloryhog]

I run a competition (stage 2) 6 puck unsprung and an ACT streetlite flywheel...I ran it with the turbo and now w/o ...its held up great for 3 yrs. or so and it was fairly inexpensive for both...my clutch does chatter a little but you get used to it after a month or so:bravo: .

[SovXietday]

^ x2, I have the stage II street disk and it holds fine even with me burning out, slipping it, feathering it, and flat shifts lol.

Edit: referring to clutch specialties clutch.

[mikeD16Z6]

looks like a solid setup Jimmy :TU: