turbo needs

[mattblackej8]

Okay so I am officially done saving for a turbo kit and am ready to start piecing it together! My question is what turbo and accessories do you guys think would be best mated to my JDM d15 vtec and where can I get them? Current mods are as follows:
complete msd ignition(8.5 mm wires, blaster 2 coil, rotor button, extreme cap,6al controller box), exedy stage one clutch, skunk 2 adj. cam gear, tsudo cat back exhaust, and ofcourse Ive got the c.a.i. and header but ofcourse will no longer be needed! I'm looking to spend less than $1500 and would be great if I could order everything today, but I need you guys help!! Thanks alot, Mattblackej8

[areskzc]

Pipings and Intercooler found cheap on ebay.
Bov and wastegate buy separately (knock-off aka imitations of greedy and HKS and TIAL are good and cheap)
Decide what turbo you're looking for and find first get the manifold.
After you found the manifold look for the turbo and if needed the plate to match it to mani.
Downpipe... custom FTW at muffler shop (get the plate accordingly to your turbo)
Get DSM injectors from ebay or a junker (found on eagle talons) depending to what boost are you aiming you may choose 350,400,450cc. Also get a resistor box or DIY a resistor connection (DIY thead on DIY forum ;))
Get a wideband O2 kit from PLX, NGK or whatever you want, a BOOST gauge, a GAS gauge and optional a PYROMETER AND OR OIL PRESS gauges.

Chip your ecu with crome or turboedit.

[ryan89crx]

read the stickies...