pingels
11-29-2006, 06:10 AM
I need a little info about the zc for someone to make a header for me.
email SMS Products sent to me
"Do you have the port dimensions and a location of the port with respect to the studs?"
David Stadulis
SMS Products
4747 Ewell Road
Fredericksburg, VA 22408
540-287-6384
email I sent to SMSP, Bisimoto and Hytech
I am looking for a header for a honda DOHC ZC. It is a d-series engine, but the exhaust ports are off a little from the regular d-series engines. My engine is heavily modified (is making 208bhp@8000rpm and 149lb@4900rpm with the stock cast iron exhaust manifold). I know the stock manifold (4-2-1) is helping shift the powerband lower in the rpms and I am looking for a header that can keep as much torque as possible, but still allow the engine to breathe as much as it needs to at higher rpms. Thanks in advance for your time.
email SMS Products sent to me
"Do you have the port dimensions and a location of the port with respect to the studs?"
David Stadulis
SMS Products
4747 Ewell Road
Fredericksburg, VA 22408
540-287-6384
email I sent to SMSP, Bisimoto and Hytech
I am looking for a header for a honda DOHC ZC. It is a d-series engine, but the exhaust ports are off a little from the regular d-series engines. My engine is heavily modified (is making 208bhp@8000rpm and 149lb@4900rpm with the stock cast iron exhaust manifold). I know the stock manifold (4-2-1) is helping shift the powerband lower in the rpms and I am looking for a header that can keep as much torque as possible, but still allow the engine to breathe as much as it needs to at higher rpms. Thanks in advance for your time.