PDA

View Full Version : need a little help with my setup.


FMYStreetRacer
03-26-2004, 05:52 PM
ok i plan on spraying a 55 shot around town and a 75 shot at the track. i need help with fuel and ignition. i want to buy the external coil etc kit that is out there. i know that there are a couple and wanted to know what is the best and what kit is more complete? and where do i buy it from?

now on to fuel. i will be buying a walbro 255 hp pump. i am thinking about buying prelude 345cc injectors but not sure if they are too big or not? also i really want to know where to get a good adjustable fpr. i have been looking at the obx one and it's a great looking kit as far as everything being there, but it's obx and might be crap. i really want the aeromotive one but i can seem to find one with a gauge and the fuel rail adapter etc.

if anyone can help me out i would really like to know where to get all this stuff and if i'm looking for the right stuff?

FMYStreetRacer
03-27-2004, 07:55 AM
please help!

FMYStreetRacer
03-27-2004, 11:09 AM
ok i found the fuel rai adapter. now it looks like the aeromotive fpr has -6 an fittings. how would i make this work on my car? will i have to change the lines on the car or could i just change the fitting on the fpr?

transzex
03-27-2004, 04:53 PM
why not just use the Aeromotive FPR made for Hondas, it bolts right up.

http://www.bettendorf.com/~mrbone/pictures/N20tuneup/FPR2.JPG

http://www.bettendorf.com/~mrbone/pictures/N20tuneup/FPR4.JPG

FMYStreetRacer
03-27-2004, 05:02 PM
where do i get it???? man have i been waiting for you to chime in :D . where can i get it i want one so bad. does it come with a gauge? if not what one should i get? i was looking to get a remote mount fpr like this one . http://i21.ebayimg.com/03/i/01/8d/42/18_1_b.JPG