Anyone have a 3bar MAP sensor w/ Uberdata?

[bailhatch]

I plan on running more than 11.03psi so what is needed to scale the maps correctly for a GM 3 bar?

[Bigwig NJ]

a 3bar map sensor, the conversion harness thinger, and clicking "3 bar" in the boost tab in uberdata. Download re-pack 5 on the forum b/c there was a fix for 3bar. You may have to search the forum a bit to find it. its there somewhere.

[itstock]

so thats all you have to do? then you just tune the higher boost maps accordingly? It doesnt mess up any of the pre 11 psi maps by switching over to the 3 bar?

[Bigwig NJ]

Bah!!!!!!!

I hate answering uberdata questions outside of the uberdata forum...

Open the stockls/gsr bin. import your P28 or P06.

Go to the Boost Tab. click on the 3bar map. Then start creating your basemap.

If you make the basemap, then press the 3bar, the numbers will be all wacky, but if you do the 3bar first, then everything will be fine.

Then tune.

Easy PZ japanesy