Some stock weights of pistons and rods

[transzex]

D15 rod = 390g
D15Z1 rod = 405g
D16 rod = 430g
D pin = 70g
LS rod = 485g

P28 piston = 235g
P29 piston = 260g
P2M piston = 220g
PM3 piston = 240g
P2P piston on rod with pin = 715g (215-220g for the piston)

bearings are 30-35g per set

I'll add other specs as I come across them.....

My scale only has 5 gram resoultion....but it'll do :)

[ryan89crx]

where's the PM6? :wink:
this will be good info when comparing my new rod/piston combo to the stock ones :TU:

[transzex]

PM6's were junked in favor of PM3's

[SOHC_Rules]

how much do the pm3's weigh then? ;)

[crxmotorsports]

I have a few PM3s and PM6s you can weigh to add data to your collection if you bring your scale the next time you're up this way.

[BigTuna]

Thank you

[transzex]

I have a few PM3s and PM6s you can weigh to add data to your collection if you bring your scale the next time you're up this way.

have scale, will travel!

[crxmotorsports]

have scale, will travel!

Lemme know when :TU:

[inh]

what about PDN pistons and LS rods? :D

[transzex]

slight update......

[remoer]

pm7 weight the same as p29?

[bense]

PMS :P