PDA

View Full Version : cabel Transmission


popoff
11-08-2006, 08:24 AM
I got an L3-020 trany, but looking for an hydro trany. dont know what fitts? the cabel trany are from crx 90mod D16Z5 engine (europ vers) the last engin prodused for crx ed9 16v non v-tec (us vers ZC) . this is a turbo engin now , so im looking for the best match ??all hydro parts are fitted just need trany Thanks

K2e2vin
11-08-2006, 08:35 AM
What car do you have? 88-91 CRX/Civic chassis use cable clutch, while 92 and up use hydraulic clutch.

popoff
11-08-2006, 09:21 AM
92-95 civic hb

DirtyDC4
11-08-2006, 12:40 PM
You need a hydro trans; S20 or S40.

popoff
11-08-2006, 01:27 PM
You need a hydro trans; S20 or S40.thanks alot..

popoff
11-09-2006, 06:34 AM
You need a hydro trans; S20 or S40.do you know the differens on s20 , s40 ..? 2nd gear?

DirtyDC4
11-09-2006, 07:04 AM
S20 is 92-95 transmissions, S40 is 96-00 transmissions.

popoff
11-09-2006, 09:48 AM
S20 is 92-95 transmissions, S40 is 96-00 transmissions.is the s20 from d16z6..?

DirtyDC4
11-09-2006, 05:22 PM
S20 is any 92-95. You need to look at the casting on the case to determine which model it came from. It's a little round stamp near where the passenger axle goes in.

A000 = bad
B000 = good

popoff
11-15-2006, 02:55 AM
S20 is any 92-95. You need to look at the casting on the case to determine which model it came from. It's a little round stamp near where the passenger axle goes in.

A000 = bad
B000 = goodokey , whats the differens A000 and B000? Thanks

K2e2vin
11-15-2006, 06:37 AM
small bearing, big bearing