changing wiring on dizzy plug??

[91HB-D15b2]

well ive had a problem with my car for a while...91 std hatch, dohc zc, pm7 ecu..well below 4k rpms, it falls on its ass whenever the throttle is smacked to the floor...but 4k and above its perfectly fine...well a buddy of mine that has done like 4 zc swaps in ef's said that theirs a few wires on one of the dizzy plug that needs to be switched around, said it has somethin to do with the firing...is this true???anyone heard of such??know which wires they are??he said he is POSITIVE that is what it is, because hes had to do it to every zc swap

[91civichbstd]

Does he mean on the Cyp plug or the dizzy plug it self?

[91HB-D15b2]

on the big dizzy plug...if i remember right...my dizzy that came with my ZC didnt have the hesitation...now with my new 89 integra dizzy its hesitates and misses really bad at idle

[secondgenguy]

i did not have to swith any plugs on mine all i had to do is wire in the to injectors. i used the stock harness. in my dx hatch

[EJ1All-Star]

the only wiring thats really changed is the cam sensor on the exhaust side, but with a std wiring harness , good luck. cause thats just a mess