d16a6 main caps interchangeable

[turbo_civicd16]

Hey guys quick quesition Im about to start my block build and I have a d16a6 block thats been cleaned decked bored .20 and honed with a micropolished crank. However during a move I've missplaced my main caps, oil pickup yada yada yada...I have 2 other d series motors laying around a d16z6 (grenaded) and a d15b (lx) will the main caps and oil pump interchange? I will be using vitara pistions and srm rods with a block gaurd as well. If anyone has any suggestions or info on the interchangeablility it would be greatly appreciated.

Thanks

Allen

[Dweezil]

The ones from the Z6 will bolt on, but you'll want to have the mains at least honed arterward to make sure there all in line.

[HondaPACT]

I used a A1 and A6 in my Z6 block with no problems, just make sure to plastigage, If something is a lil off you might have to use Honda bearings for there color cordinates clearences, although I have never ran into this problem