clockstick
10-23-2006, 10:05 PM
Ok so in Canada the plug that plugs into the Alternator is a three wire plug, in the states a 4 wire plug...
In the us there is an extra wire White/Green that goes to the ECU. The canadian version does not have this. If I splice in the CND plug and just tape up the above mentioned wire that goes to pin 19 on connector A at the ecu, will ti do anything funky?
Thanks
OBD2 ECU P2P
In the us there is an extra wire White/Green that goes to the ECU. The canadian version does not have this. If I splice in the CND plug and just tape up the above mentioned wire that goes to pin 19 on connector A at the ecu, will ti do anything funky?
Thanks
OBD2 ECU P2P