PDA

View Full Version : turbo size

93civ123
10-23-2006, 08:17 PM
ok people right now im building my motor i got rods pistons and clutch and flywheel and in like another 2 monthes my motor is gonna b fully built. My question is im planing on boosting anywere from 15 to 20 pounds and im haveing trouble choosing what size turbo what do u guys think i should go with ...i dont want anything that spools uip real late like right befor redline
Dweezil
10-23-2006, 08:21 PM
What engine, what kind of pistons and rods, what head, and what compression. PSI means nothing without airflow. What kid of driveing are you doing, and what WHP are you looking for?
93civ123
10-23-2006, 08:30 PM
z6,eagle h bean, cp stock compression pistons well i was thinking with a good tune it should be either over or a lil under 300
93civ123
10-23-2006, 08:31 PM
o and a daily driver
Dweezil
10-23-2006, 08:34 PM
Garrett GT28RS or MHI "EVO III" big TD05-16G. Either one will do it, the Garrett is deffinetly the better of the 2 for a DD.
93civ123
10-23-2006, 08:41 PM
Garrett GT28RS or MHI "EVO III" big TD05-16G. Either one will do it, the Garrett is deffinetly the better of the 2 for a DD.

cool ccool and how much do u hink i could find one 4>?:confused:
Dweezil
10-23-2006, 08:55 PM
Here's the GT28RS:

http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=GRT-TBO-004&Category_Code=GRT

and the Evo III:

http://www.slowboyracing.com/shop.php?sid=&cat=195
ryan89crx
10-23-2006, 10:00 PM
www.blaastperformance.com

t3/t4 50 trim, fast spool, and broad powerband :TU: