View Full Version : How much boost can take rods take??
BoostedEG
10-18-2006, 01:52 AM
just wanted to know how much boost stock rods can take??? with stock or low compression pistions and 10-15 PSI
drunkinmaster1
10-18-2006, 05:47 AM
just wanted to know how much boost stock rods can take??? with stock or low compression pistions and 10-15 PSI
psi is an inaccurate # to go by. hp is a more realistic goal.
with a good tune between 200 to 250.
psi is an inaccurate # to go by. hp is a more realistic goal.
with a good tune between 200 to 250.
Good tune ...
bad tune .. boom no matter how little hp
ryan89crx
10-18-2006, 07:12 AM
psi means nothing
we would need to know what motor, first...then what turbo....
what are your power goals?
BoostedEG
10-20-2006, 09:18 PM
This is a Y8 with t-28, crower stage1 cam, ls tb, AEM fuel rail, chiped ECU, 450 DSM, FMIC, full 2.5 EX, Greddy log mani, P-n-P head, and 8 PSI now.. but soon adding vitara LC pistions then t-3/t-4 ball baring... have no clue what im pushing HP or track time now... I wanna run any thing in the 11's
Sohc Wrath
10-20-2006, 10:03 PM
This is a Y8 with t-28, crower stage1 cam, ls tb, AEM fuel rail, chiped ECU, 450 DSM, FMIC, full 2.5 EX, Greddy log mani, P-n-P head, and 8 PSI now.. but soon adding vitara LC pistions then t-3/t-4 ball baring... have no clue what im pushing HP or track time now... I wanna run any thing in the 11's
The t28 is not that big so you should be fine with 10psi, at least that is what I would run.
ryan89crx
10-20-2006, 10:45 PM
I wanna run any thing in the 11'sbetter get that motor built, an LSD, and some big slicks
I don't understand why so many noobs continually want to run 11's.
11 seconds takes a serious engine and a great driver...
And stock rods do not go well with 11second runs...
singlecizam
10-21-2006, 06:35 AM
if you could runs 11's on those parts, everyone would do it... Hell, I'd pull out th h22 and go back single cam..lol
drunkinmaster1
10-21-2006, 09:42 AM
formula for an 11 second car:
750 injectors
tt or eagle h beam rods.
vitaras.
t3/t4 57 trim 60./.63 stage 3 wheel.
chrome pro.
good tune.
25 psi on race gas
obx lsd.
hardcore clutch that sucks for city drving
slicks.
good driving.
Belette
10-21-2006, 02:57 PM
formula for an 11 second car:
750 injectors
tt or eagle h beam rods.
vitaras.
t3/t4 57 trim 60./.63 stage 3 wheel.
chrome pro.
good tune.
25 psi on race gas
obx lsd.
hardcore clutch that sucks for city drving
slicks.
good driving.
+
- Better fuel pump
- aftermarket drive shafts
- 2.5 mendrel free flow exhaust
- fully built engine
- turbo cam/intake/tubing
- valves and head job.
- much more
That doesn't mean 11 sec cars. It can be high 12sec too, it depend too from height, car weight, car aerodynamism, temperature. It's a real guest estimate that setup or that car will run in 11sec. Turbo choice and gearing are little bit in interaction. fast and small turbo will take advantage of small gearing and bigger turbo with little bit longer gearing.
In what engine ? d15 or d16y8 ? vtec or not ? really not same hp and tq curves.
drunkinmaster1
10-21-2006, 03:20 PM
+
- Better fuel pump
- aftermarket drive shafts
- 2.5 mendrel free flow exhaust
- fully built engine
- turbo cam/intake/tubing
- valves and head job.
- much more
That doesn't mean 11 sec cars. It can be high 12sec too, it depend too from height, car weight, car aerodynamism, temperature. It's a real guest estimate that setup or that car will run in 11sec. Turbo choice and gearing are little bit in interaction. fast and small turbo will take advantage of small gearing and bigger turbo with little bit longer gearing.
In what engine ? d15 or d16y8 ? vtec or not ? really not same hp and tq curves.
y8 block, z6 head
-i do have a walbro 255
-stock drive shafts
-only thing built is vitaras, eagle rods, and apr headstuds.
-stock cam, stock intake, stock tb
-stock head
-11.43 @ 127
405hp
drunkinmaster1
10-21-2006, 03:25 PM
http://www.llarian.net/~gomer/SIK_SOHC%2011.58%20@124mph.WMV
singlecizam
10-21-2006, 03:55 PM
exactly how much could take rods take, if a take rod could take rods?
lol....
BoostedEG
10-21-2006, 10:57 PM
i just wanted to know how hard to push them i have a block with vitaras and ordered rods, honed, arp rod bolts and arp studs... you think im a noob cause i ask a stupid question... i didnt say i was gonna run 11's on what i got. thats just what i wanna run.. my goal.. but thanks for the help and being so positive
ryan89crx
10-21-2006, 10:58 PM
ballpark for stock rods is 250hp MAX
dont look at it as a psi amount, look at the power amount
BoostedEG
10-21-2006, 11:09 PM
a friend of mine ran 13.7 at portland running d15 stock and blown t-bird turbo on 10 pounds and ECU no tune
BoostedEG
10-21-2006, 11:22 PM
if you could runs 11's on those parts, everyone would do it... Hell, I'd pull out th h22 and go back single cam..lol
y8 block, z6 head
-i do have a walbro 255
-stock drive shafts
-only thing built is vitaras, eagle rods, and apr headstuds.
-stock cam, stock intake, stock tb
-stock head
-11.43 @ 127
405hp
any one wanna buy an h22 and i got a D15 and d16 if you wanna swap!!! lol
X292J
10-21-2006, 11:40 PM
2psi from this thing...that is if you can spool it.
http://www.mjmturbos.com/images/RUSSIANRED.jpg
mindless
10-23-2006, 05:51 AM
Fuck the rods...if I was boosting stock I'd be worrying about the ringlands first.
BoostedEG
10-26-2006, 01:17 AM
my buddy has that tubbo on his 350Z.. page 1
vBulletin® v3.7.3, Copyright ©2000-2009, Jelsoft Enterprises Ltd.