PDA

View Full Version : vband flanges.

lsturbohatch10
10-17-2006, 10:42 PM
ok guys i have decided the turbo i am going to run. its a .48 .60 60 trim and its internally gated witha vband dp flange. i am going to fab the dp up myself. i need to know a good place to buy the vband clamp and flange, some 3in mandrel bends, 3in flex pipe, and exhaust 3bolt flange
http://i50.photobucket.com/albums/f339/lsturbhatch10/myturbo1.jpg
http://i50.photobucket.com/albums/f339/lsturbhatch10/myturbo.jpg
lsturbohatch10
10-17-2006, 11:23 PM
how about these flanges. i know there ssac. but do you think they are ok?
http://cgi.ebay.com/ebaymotors/Super-3-V-Band-Kit-2-CNC-Flanges-1-Stainless-Clamp_W0QQitemZ150047734594QQihZ005QQcategoryZ3374 2QQrdZ1QQcmdZViewItem
CoreyR
10-17-2006, 11:41 PM
ssac vbands work fine.
X292J
10-18-2006, 03:22 AM
The flanges are ok IMO from experience( i used an ARC welder). But i cant comment on the v-band clamp. I got mine from ebay also, but not from SSAC, instead i got mine from a company with a "Route 66" or something in their name. Works great, only thing was that i screwed up the threads on the clamp from me being lazy.
csaddict
10-18-2006, 05:24 PM
I used the SSautoshit one for my V band DP cutout and it worked great. No complaints.
lowcrx
10-18-2006, 05:26 PM
ssac vbands work fine.

yes they do...
ryan89crx
10-18-2006, 05:40 PM
you are going to run that turbo??

you do realize that its a .60 exhaust side, .48 compressor side right? if you are going with a knockoff with that big of turbine, go with the .63/.50 50 trim...
CoreyR
10-18-2006, 10:23 PM
you are going to run that turbo??

you do realize that its a .60 exhaust side, .48 compressor side right? if you are going with a knockoff with that big of turbine, go with the .63/.50 50 trim...

pretty sure its a .48 hotside .60 comp cover. unless they made it backwards, never heard of a .60 hotside and .48 coldside. then again it is chinese ;)
ryan89crx
10-18-2006, 10:43 PM
pretty sure its a .48 hotside .60 comp cover. unless they made it backwards, never heard of a .60 hotside and .48 coldside. then again it is chinese ;)looked at them already, i was all stoked until i found out it was ass-backwards :neutral:

http://cgi.ebay.com/ebaymotors/T3-T4-TURBO-60-trim-AR-48-internal-wastegate-V-BAND-new_W0QQitemZ120041642562QQihZ002QQcategoryZ33742Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem


DESCRIPTION: T3T4 AR48 60TRIM T3T4 TURBO WITH WASTEGATE ( 90 DAYS WARRANTY )
TURBO Spec :
3" inlet diameter
3" v-band outlet
1/8 npt oil inlet
T3 flange
.48 A/R compressor
.60 A/R tubrine
.60 trim
internal wastegate set 8 psi
wet float bearing
CAPABLE OF 27 PSI