putting stuff together

[SOHCpower]

can i get the oil feed stuff from home depot? i see they have braided lines but what about the fitting for the oil pressure? also i went there to see if they had 180* bent aluminum tubing and they dont i mean wtf lol.. cause i wanna make my own charge piping, does anyone know where i can get this from?

thanks

[myHonda1]

i have an extra (used)braided line and a feed fitting for the turbo if interested. LMK

[tallkyle]

http://www.stealthmodeperformance.com/oil-kit.shtml

best shit for the money

Go to summt racing or jegs and order U bends. Cut to fit and weld. cheap and mandral bent.

[superdewey58]

stealthmode x2

[myHonda1]

yea there right for everything you need go there

[SOHCpower]

myhonda1 how much do you want for it? the feed fitting is the one that goes between the oil pressure sensor and the block right?

see thats really all i need because i have the return stuff already except for the tapped oil pan thing... i was thinking of running an electric pump to an oil cooler then to the valve cover.. but might be a bit of work lol

also i found out the turbo i have which is a garrett T3 came off different types of cars and the downpipe flange can be different, if the flange is a 5 bolt for a t3 it should fit right? mines a 5 bolt exhaust housing

[myHonda1]

Well, what i have exactly is a used stainless feed line and the fitting for the feed to the turbo. i dont know if it would fit in the fitting off the oil pressure sending unit.
i also have an extra oil pan feed fitting.
about the t3 housing, i would think it would fit, but dont quote me on that

[SOHCpower]

so how much do you want for the fitting to the turbo and the tube? i can get the block fitting at home depot right or lowes?

[Got Vtec?]

Tuner Toys is a great website. I am going to be rocking the Stealthmode kit myself, its at a great price to boot.