Bottom end build kit?

[fjt]

Well this is not exactly a for sale post so that is why i post it here since it has to do with FI and NA.

Someone posted a while ago about a Bottom end kit for Forced induction that was selling on ebay and im just wondering if you guys might be interested in getting something like that. I am planning on putting a kit together for Boost and NA and was just wondering if you guys are interested. This would be a more complete kit rather than just getting your Vitara pistons through me.

The kit will come with:

boosted applications:
Vitara pistons(with wrist pins and clips)
Hastings or NPR rings
Metal Head Gasket
Main Bearings(Crank bearings)--->KING Bearings
Rod Bearings--> KING Bearings

For NA Applications:
P29(dome) or PM6 Pistons( Nipon pistons)
Hastings or NPR rings
Metal Head Gasket
Main Bearings
Rod Bearings

Moderators if its not in the right place go ahead and move it.. I will make a Sale post in the right section IF there is a good feedback/interest on all this stuff. For now i just want to see if members want it or not.

[slebidia]

You should add a set of TT rods to the boost kit.

[Got Vtec?]

Yeah I would add some rods for sure....

[fjt]

i would but i dont have the hook up for TT rods.

[ryan89crx]

i would but i dont have the hook up for TT rods.ill PM you when i get home...

you have a re-sellers permit? i can get you the hookup from the manufacturer :TU:

[jimmyb34]

i might be interested in the na build depending on price....

[fjt]

i dont have a re-seller permit..Im not a business

But if i have to get it to get the hook up..how can i?

[ryan89crx]

But if i have to get it to get the hook up..how can i?i dont really know. i was looking around for the same info on hopes of selling these rods, but i got lazy and stopped...

[ardevas09]

i'd be all over that if the price is reasonable

[fjt]

i'd be all over that if the price is reasonable
thats the plan.. offer it at a very reasonable price.

Ill be making some phone calls and i should have a price soon. Maybe by tomorrow afternoon.

[ryan89crx]

thats the plan.. offer it at a very reasonable price.

Ill be making some phone calls and i should have a price soon. Maybe by tomorrow afternoon.shot you a PM :wink:

[b00stedSohc]

ill be waiting for a price. ;)

[RandysSOHC]

this is a good question that others may ask.....

I have the pistons & rings already...
would you be willing to sell the rest of the kit for the boosted app?

give me a pm on around the price or if you even will....thanks

-Randy

[froggie3kb]

you have a re-sellers permit? i can get you the hookup from the manufacturer :TU:


I do, willing to help my fellow d-series guys here out if you've got the hookup...;)

[fjt]

this is a good question that others may ask.....

I have the pistons & rings already...
would you be willing to sell the rest of the kit for the boosted app?

give me a pm on around the price or if you even will....thanks

-Randy
Yeah i guess i can work something out for those who already have the pistons.

I almost have a price

[fjt]

Well i have a price..

Everything (Pistons[Vitaras or PM6 or P29],rings,wrist pins, Head gasket, Main bearings, rod bearings) will be $240. That includes Shipping and handling and Paypal fee.This price is to the USA only(Hawaii and P.R included).

The only problem i see is that the rod bearings are not listed for the Z6 engine(92-95 civic). I dunno if the 96-00 or 88-91 bearings will fit the Z6.

For the ones that already bought pistons and just need the HG, rod bearings and main bearings i will have a price later.

[ryan89crx]

Well i have a price..

Everything (Pistons[Vitaras or PM6 or P29],rings,wrist pins, Head gasket, Main bearings, rod bearings) will be $240. That includes Shipping and handling and Paypal fee.This price is to the USA only(Hawaii and P.R included).

The only problem i see is that the rod bearings are not listed for the Z6 engine(92-95 civic). I dunno if the 96-00 or 88-91 bearings will fit the Z6.

For the ones that already bought pistons and just need the HG, rod bearings and main bearings i will have a price later.good price!

FYI - z6 rods = a6 rods :TU:

[Jcazz]

When using the Suzuki pistons, do you have to modify anything for them to fit?? or will they go in with ease...

[fjt]

When using the Suzuki pistons, do you have to modify anything for them to fit?? or will they go in with ease...
Depends on what rods you use..

D series rods + vitaras = Modification

TT rods + Vitaras = small modification (ask Tunner Toys about it)

Eagle rods + vitaras = Plug and play, perfect fit, no modification

[24-7]

Honestly I would build your bottem end from scratch.

[Jcazz]

What about Tuner Toy Rods and the Vitaras...

[TonyTek]

how much if i pick them up at your house?!? jejeje

to bien Francisco?

-tony

[fjt]

If you pick up...$225

todo cool mi hermano

[98_4drCivic]

I may be interested if you could include the TT rods with it.

[fjt]

I hardly doubt i can include the TT rods.. I am not a business and i would have to buy the rods in quantities to get a good deal + i'd have to go through the process of getting a re sellers permit (you have to pay for that)just to be able to purchase the rods from the manufacturer.

There are good places out there that sells the rods for a good deal..

You could have a great bottom end for 500 bucks or less

[hectorcuper]

what will these vitara pistons do in a d16a9, i mean what compression numbers should i be looking at?
The d16a9 has a combustion chamber of 42 cc's, stock compression is 9.5:1.

[jdmcivic517]

i'd take a kit

[TonyTek]

If you pick up...$225

todo cool mi hermano

sounds good...

-tony

[fjt]

well i need to see then how many are interested...so that i can go ahead and post it in the classified section. Maybe we can do a group buy.

For the ones that already have the Pistons and rings:
Metal HG, Rod Bearings, Main bearings--->$125 shipped and includes paypal fee.

[hectorcuper]

what will these vitara pistons do in a d16a9, i mean what compression numbers should i be looking at?
The d16a9 has a combustion chamber of 42 cc's, stock compression is 9.5:1.

Never mind, figured it out allready.
It would set it down to abot 8.1:1.
What kind of boost could i run with this compression using ron 95?
And when using ron 98 when i feel like flying?

[hectorcuper]

FJT, i'm from the netherlands and i have no paypal account because i have no creditcard.
Would there be some other kind of method to be able to pay you (if i decide on buying this kit) ?

[fjt]

Never mind, figured it out allready.
It would set it down to abot 8.1:1.
What kind of boost could i run with this compression using ron 95?
And when using ron 98 when i feel like flying?
On 93 pump gas you can run like 20 PSIs w/o problems

I ran 18PSI daily on 8.5:1 CR with no signs of detonations.


FJT, i'm from the netherlands and i have no paypal account because i have no creditcard.
Would there be some other kind of method to be able to pay you (if i decide on buying this kit) ?
Sure..you can send me a Money Order(postal MO prefered) or a Western Union transfer or check.

[hectorcuper]

Nevermind, i allready setup a paypal account, and i thought i needed a creditcard :P

oke, next question.
The kit you sell comes with a headgasket right, but i have a zc, that gasket ain't gonna fit (i think).
So i'm gonna need to buy one myself.
What other parts in this kit won't fit the zc?

[fjt]

is it a DOHC ZC or a Sohc ZC

[hectorcuper]

It's a euro d16a9 dohc.

[fjt]

Then it should be the same as a d16a6

[hectorcuper]

:) i think you can count me in for a kit then (not 100% sure yet though, more like 89% )

[redline7500]

i would be intersted i just need to find a spare z6 to work on to work on have you set a date yet for the payment

[JoelAllenClear]

It's a euro d16a9 dohc.
DOHC
Then it should be the same as a d16a6
SOHC

Won't fit... :mad:

[fjt]

:) i think you can count me in for a kit then (not 100% sure yet though, more like 89% )
Hector if youre in i will need your address so i can recalculate shipping..since youre not in the USA the price goes up due to shipping.


have you set a date yet for the payment

Well this would be special ordered, so i will have to pre order everything. Im thinking of giving a 2 week period for everyone interested to sign up, then get everyone's payment and order the stuff and then ship it out.

that way i wont have to be doing 2-3 trips a week for parts.

[fjt]

DOHC

SOHC

Won't fit... :mad:
hmm i missed that... I didnt knew there were DOHC d16 (xcept for the Dohc ZC but that is labeled as ZC and not d16)

In that case Hector i can just take the Head gasket out of the kit and just re calculate the price..It would be cheaper..That way you can get your own Head gasket.

[hectorcuper]

Yeah i think i'm in.

So it would be a kit without headgasket send out to this address:
Grindweg 98 (adress)
8485 JD (zip code)
Munnekeburen (city)
Friesland (state)
The netherlands.

[fjt]

well i will do a post on the classified section later this afternoon with all the details for the ppl to sign up.

[hectorcuper]

arch arch arch (that's pirate talk :p )

[fjt]

Hector i got good news.. The Head gasket will fit.. I have a friend with a DOHC ZC turbo and he uses the CRX d16a6 HG.


What do you guys think if i also add a Timing Belt to the kit for a lil bit more?

[hectorcuper]

only if you also deliver the kit without one, or with a dohc one.

[Soulless]

I like the kit as is. Depends on how much the belt adds!

[fjt]

it will be $15 more with the belt.

[fjt]

It is posted... Starting today.

http://www.d-series.org/forums/showthread.php?p=595443#post595443

[froggie3kb]

It is posted... Starting today.

http://www.d-series.org/forums/showthread.php?p=595443#post595443



I take it I cant look at this thread because I dont have 65 posts?

[redline7500]

same here :(:(

[fjt]

well just let me know and i will add you to the list.. Basically the kit will cost $240 shipped and it will come with pistons, rings, wrist pins, Metal Head gasket, Main engine bearings(crank) and rod bearings.

[froggie3kb]

well just let me know and i will add you to the list..



Thanks, just a couple more posts and i'll be able to check it out finally lol...;)

[inh]

i would jump on this if i could get pm3 pistons and wasnt going to be in the field all month

[fjt]

GB closing today... I see some ppl here interested but i havent received any confirmation from you guys..

I need confirmation so i can make the orders..
Group buy closes today in the afternoon.

Thanks

[redline7500]

i want to place an order but at the time money is real tight this month if paymtne isnt needed upfront then count me in. but i dought you will do it with no money in hand :(

[FBS]

Man, seems like a good deal, but I don't have the money/time/whatever else at the moment.

Any chance you'll be doing another group buy in a month or two?

[JoelAllenClear]

Man, seems like a good deal, but I don't have the money/time/whatever else at the moment.

Any chance you'll be doing another group buy in a month or two?

[nathan]

I have a similar one-off "kit" for sale :). see my signature. Eagle rods too

Nathan

[fjt]

well the GB ended..If you guys still want the kit just let me know and i can get it for you if there are 2-3 ppl interested at the same time..I just want to avoid making 2-3 trips a week for parts since i do this on my free time.

[redline7500]

k :) i am putting some back each paycheck and i also have some thing i am selling localy bills and rent made it hard this month:( good thing i have a freind moving in at the first of september that will make it easyer to buy stuff i need to rebuild me a better engine