spoon vtec controller

[Anonymous]

Does anybody knows if this will work with the pm6 ecu out of a crx si?

I am swaping a sohc vtec. this vtec is supposed to be plug in directly into the ecu.

[BseriesKllR]

ok first off your a little mixed up.......ok your pm6 ecu is not a vtec ecu so vtec would not go to the ecu you would connect it to the spoon vtec controller....then set it at a good point and you got VTEC :D

[DraZtiK]

are you swapping out the whole motor or just the head? if its just the head besure to take out the Oil control jet or else VTEC won't actuate. i have an Apexi V-AFC and it works fine.