DSM injectors question.

[areskzc]

Hi guys

Currently on the turbo project of a T3 running on a d16zc vtec at @7psi. I read about the dsm injectors and found some on ebay. There are blue tops and black tops, I read they are the same. Also the turbo faq here reccomends the 370cc injectors to my 220whp goal. Can I go with 450cc? (Maybe in future I'll raise boost.) And do I need a resistor box on a 92-95 civic? any other mod/piece needed?

Thanx

[94lxcivic]

you do need the resistor box, blue and black were just diffeent obd's... and as long as you are tuning it, you can make a 450 run like a 200... its all in the tune...

[sohcturbo]

what he said ^^^^ 440 450 they all work with the resistor box... I'm running 1000cc injectors and it drives and idles fine its all in the tune

[TonyTek]

I have DSM Bluetops in my Y8...even tho im having some issues with my car right now, it idles fine when it warms up. i did the inline resistor way instead of a resistor box...check the DIY forum...nice writeup and pics by Bizzar...

-tek

[ryan89crx]

id definately get 450s over 370s, gives you room to upgrade.

[JoelAllenClear]

id definately get 450s over 370s, gives you room to upgrade.


Exactly what he said. No if's, and's, or buts about it cause once you feel boost, you'll most likely want MORE.

[areskzc]

Roger!

Provvisionally I will run my setup with a FMU and my FPR. Later I will mess in CROME (still learning)

Thanx guys!

[areskzc]

Reps UP