2001-2004 Tranny Ratios [Archive]

transzex

01-26-2006, 01:50 PM

........DX/LX.........HX...........EX
1......3.461.........3.461......3.142
2......1.869.........1.750......1.869
3......1.241.........1.116......1.241
4......0.969.........0.857......0.969
5......0.710.........0.710......0.756
FD....4.111.........3.842......4.411

Info if from Factory Honda manual for 2001-2004 Civics.

f00ker

01-26-2006, 01:54 PM

thanks boner

berettagtz117

01-26-2006, 02:38 PM

Foshizznit! I new it was better than previous tranny's !!!

f00ker

01-26-2006, 07:28 PM

Foshizznit! I new it was better than previous tranny's !!!

*knew

transzex

02-03-2006, 12:21 PM

the taller tires offset the advantage........

f00ker

02-03-2006, 12:24 PM

the taller tires offset the advantage........

are the tranny's compatible with 92-2k civics?

transzex

02-03-2006, 12:31 PM

nope.

2001 + use cable linkage to shift.

PS might wanna add this as a sticky in the 7th gen forum.

f00ker

02-03-2006, 01:41 PM

nope.

2001 + use cable linkage to shift.

PS might wanna add this as a sticky in the 7th gen forum.

cable, as in...just like the 4th gen, or completely different.

K2e2vin

02-03-2006, 03:28 PM

cable shift linkage as in prelude/accord/RSX. ;)

88-00 had solid linkages.

f00ker

02-03-2006, 03:34 PM

cable shift linkage as in prelude/accord/RSX. ;)

88-00 had solid linkages.

ahhhhhh, i was thinking of the clutch!

gmcuajo

04-28-2006, 12:04 PM

nope.

2001 + use cable linkage to shift.

PS might wanna add this as a sticky in the 7th gen forum.

If the problems is the cable linkage, I can say yes it fit. Just use the 01-5 civic shifter (with its plastic mounts) and clables and use your imagination to fit it on the car.

On Honda Tuning magazine they swap a K20 or K24 on an older civic. They cut the floor where the shifter is, use aluminum sheet to build a custom mount. Ask a friend who receive that magazine...

f00ker

04-28-2006, 12:16 PM

If the problems is the cable linkage, I can say yes it fit. Just use the 01-5 civic shifter (with its plastic mounts) and clables and use your imagination to fit it on the car.

On Honda Tuning magazine they swap a K20 or K24 on an older civic. They cut the floor where the shifter is, use aluminum sheet to build a custom mount. Ask a friend who receive that magazine...

wow, you are so helpful, thanks for all of your information, and your sources!

:fairies:

maxquebec

05-28-2006, 08:40 AM

question please
the casing is it the same

Chiovnidca

07-22-2006, 06:42 AM

blackDseries

10-19-2006, 04:32 PM

yes the trannys out of 01-05 civics are the same as the older ones minus the linkage. you can bolt an 01 tranny to a Y8 or Z6 so ive read , ive never tried yet.

remoer

10-20-2006, 07:16 AM

soooooooooooooooooooo.... what would be the ratio on the conversion from 5 speed to 6 speed? the only reason i ask cause i'm in the process in buying a EP3 and i made a thread on it a while back. lol
http://www.d-series.org/forums/showthread.php?t=43370

Shireen

07-26-2007, 12:52 PM

How hard would it be to make it a 6 speed (matter of adding an extra gear, or is it a matter of getting a new mount able to handle the 7 gear settings [with reverse].)

I saw on another thread that it would be advantagous to swap first gear for a 2.75 gear, does that still apply to our DX/EX models?

transzex

08-22-2007, 11:17 PM

You sure that hx 3rd isnt 1.166? That's what the 01-05 manual says.

You saying that the 05 manual has a typo or the earlier ones?

One of them has a typo which is quite common.

transzex

08-22-2007, 11:29 PM

You sure that hx 3rd isnt 1.166? That's what the 01-05 manual says.

You saying that the 05 manual has a typo or the earlier ones?

One of them has a typo which is quite common.

transzex

08-22-2007, 11:30 PM

You sure that hx 3rd isnt 1.166? That's what the 01-05 manual says.

You saying that the 05 manual has a typo or the earlier ones?

One of them has a typo which is quite common.

transzex

08-22-2007, 11:30 PM

You sure that hx 3rd isnt 1.166? That's what the 01-05 manual says.

You saying that the 05 manual has a typo or the earlier ones?

One of them has a typo which is quite common.

modsHXcivi

08-23-2007, 08:29 AM

You saying that the 05 manual has a typo or the earlier ones?

One of them has a typo which is quite common.

One more time i think we have a typo

Chiovnidca

08-23-2007, 01:19 PM

You saying that the 05 manual has a typo or the earlier ones?

One of them has a typo which is quite common.
I didn't check any of the others. That was the last book they gave us.

Diemaster

07-16-2008, 12:00 AM

i know i'm bringing back a old thread but i got a question.

i got a EX so if i put in a LX tranny will those ratios mean that 1st is more power (shorter gear) and 5th is fewer RPM at X speed or more MPG? also how does the final drive fit in? do i add it to X gear to get the final drive?