Here we go...Hell swap?

[Rexxer]

very shortly i will be swapping a d16a1 from a 87 Integra, into my 88 CrX Dx ...this is going to be fun, and hell as some say...now im trying to gather all the info about the swap i can...start them posts, :twisted:
Main thing i need to know about is wiring, but all advice welcome.

Thanks,
Steve

[strudel]

One issue is the timing side mount. Not the same mount but not an insurmountable issue as some claim. Check this thread. http://www.d-series.org/viewtopic.php?t=3273 Similar thread with a picture. http://resource.crx.org/modules.php?name=Forums&file=viewtopic&t=20164&hig hlight= JS

[Rexxer]

Yea i was looking into that, then i was also reading around about tranny problems...im ripping the motor out, possibly tomorrow (out of the integra) that is ...
something wrong with the tranny thats in the teg, yet to see what it is till i take it apart, but if that fails, ive got a d15 tranny laying around :P
Overall, im trying to figure out what needs to be wired...i can fab the mount to my liking im sure.

[z1 master]

i just got done with my d16a1 swap into a carberated 84 crx and i just bought the book for the teg and the rex and matched wires. takes alot of patience 8)

[Rexxer]

well what exactly needs wired? cause i was looking at it, and alot of the wires look the exact same as whats on the rex.

[hatch-attack]

my question is why? the 86-89 teg motors have less hp and trq than a zc does. I guess if were going to build it that would be ok but I'm about saving myself hassle and that seems like this swap is going to be 1

[Rexxer]

Well the car has no motor, and i have this avai so i dont see why not. :)

[slebidia]

I wouldn't bother trying to make this work....... It's been done but you have to reweld one of the holes for the transmission and fab up a custom drivers side mount. It's really not worth it for a stock Teg motor. I would sell it and buy something that fits.

[Rexxer]

i have access to a cnc mill so ...i can fab up a nice looking aluminum one.. :)

::poke, anyone know what needs to be rewired? :P::

[slebidia]

http://www.quickhonda.net/

Go to ZC motors and 2nd ZC. You'll see what has to be done.

[Rexxer]

omg, wheres all the pictures the guy said he was gunna use :/

[jdmspecdc5]

if you need parts i've got tons. =) good luck with your swap.

jdmspecdc5@hotmail.com