where to tap fuel supply for nitrous????

[preacherboy]

can any body tell me where and how to tap a fuel supply line for a zex wet kit? are there any pics or instrustions?? already searched...
i've heard a couple of things and im just wondering what the deal is
thanks

[dragman99]

fuel return line. how, i'd have to see the kit.

[B]

Not sure on a Zex kit, but the easist place to tap into the fuel rail on a Honda is at the banjo fitting on the inlet (fuel filter side) take it out and drill and tap thru the head of it (1/8 npt will do)......

[DOHCDX]

fuel return is a big no-no

you use the fuel feed after the fuel filter. i would get a b&m fuel pressure gauge, put a T on the top of the banjo bolt fitting included with the gauge. then install the gauge on one side, and the feed to the nitrous on the other.

[Lule]

I've seen a tee installed in the fuel line between the fuel filter and the fuel rail. Definitely not on the return line.

[Deck]

This isnt exactly an n/a question.

Moved.